How To: 1/2" Rear Spacer Install
Figured i'd throw this here as a "how to" for people to reference.
First and foremost, go through all the necessary steps to remove the spring:
Jack up vehicle
Jack stand under frame rail
Disconnect swaybar
Disconnect shock
Remove spring
https://theultimatejeep.com/images/i...24154306-1.jpg
A screwdriver helps get the lower isolator off
https://theultimatejeep.com/images/i...24154317-1.jpg
I recommend cleaning the surface.... there'll be caked on dirt (unless you stay in mall parking lots)
https://theultimatejeep.com/images/i...24154341-1.jpg
The top side of the spacer has double sided tape. Not necessary, but it helps keep things aligned when offroading and losing spring force due to flex
https://theultimatejeep.com/images/i...24160427-1.jpg
Mate the spacer with the isolator. I recommend putting new isolators on while you're at it...
https://theultimatejeep.com/images/i...24160437-1.jpg
https://theultimatejeep.com/images/i...24160605-1.jpg
Next put the spacer/isolator combo back on:
https://theultimatejeep.com/images/i...24160701-1.jpg
https://theultimatejeep.com/images/i...24160708-1.jpg
And most importantly, put the spring back in! :p (Ok i guess the tire is important too...)
https://theultimatejeep.com/images/i...24161118-1.jpg