Who all has deleted their rear climate control lines?

[JustinS]

After seeing the prices posted above for the heater lines I'm just going to splice them together in the engine bay with a barbed fitting. Will post up my results tonight.

[1USMC]

I think Hemi part numbers were different than my 4.7 liter. I don't recall what my part numbers were

I was thinking the same thing.... but later when someone is searching the forum, perhaps we could have as much info on this topic in one place like this thread. ;-)

[Sal-XK]

After seeing the prices posted above for the heater lines I'm just going to splice them together in the engine bay with a barbed fitting. Will post up my results tonight.

That's what I did cost me like $4 bucks to do it.

[JustinS]

The size for the heater lines is 3/4" for future reference.

I only bought a 1/2" barbed fitting so I had to improvise...I'll let the pictures do the talking. Total cost $0.00.










I still have to crimp the cut lines and do some pinch weld trimming but I'm almost there.

[1USMC]

Thanks for the photos..

I'm liken the costs listed 0 > $4. !

[JustinS]

Just make sure you don't have any kinks like I do in that last pic, I added some more hose clamps in the kinked areas to open them back up. I might revise this in the future but it should do for now.

[1USMC]

If / when I consider this mod, I might also check at the local junk yard ( sorry... I mean salvage yard, auto recycling center or automotive regeneration facilitating pre-owned parts purveyor ) for the A/C hoses.