Where does the step go? I have people coming this weekend to look at the XJ one guy on friday says he wants but we will see. Not sure if I want to wait for the step or not. Do you have a drawing or anything?
Where does the step go? I have people coming this weekend to look at the XJ one guy on friday says he wants but we will see. Not sure if I want to wait for the step or not. Do you have a drawing or anything?
I do not have a drawing but the step is going to be a flat piece of metal (most likely steel diamond plate for that little bit of traction) approximately 3.5" x 16" with the Steel Armadillo logo water jet cut into it, the step will be welded into the space between the two center supports and welded on all four side.
The water jet logo sounds cool how much are the steps? I might have to wait for them. On the up side I sold my jeep!!! So Friday I'll have the money and if he backs out I had a guy trying to out bid him for it tonight but I refuse to make a profit on selling this Jeep so I told him no. So as soon as he pays me I'll put the money in the bank and order the sliders and some other stuff so keep one of those sets for me please My only concern now is will my smashed rocker panel cause any issues with installing the sliders?
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
Hammers and welders fix many things.
maybe not ripped off steps...
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
I took another look at the rocker. The pinch weld is fine and straight its the actual rocker panel above that has all the damage.
If the rocker is damaged, spray one of the stop rust products on the metal. Typical bedliner does not protect from any rust already started.
There are currently 3 users browsing this thread. (0 members and 3 guests)