.
I wanted to have connectors at the rack so if necessary I could easily (?) disconnect the electrical connections and then remove the rack with the lights on it.
The darn experimental rear running light had 8 wires on it alone. That was 16 wires just at the rack to crimp, heat to seal, apply liquid electrical tape, wrap in electrical tape and then cover in wire loom.
And they still had to be wired below !
This all took a little ( a lot) longer than I had expected to say the least !
Wires wires everywhere.. again…
Now the rear lights are wired to come on automatically when I am in reverse or can be manually selected on.
The side lights, front ¼ and main front are individual controlled.
For info on how I installed these light switches >
http://www.theultimatejeep.com/showt...llation-Option
.
.