Adam those are directly out of the 2008 manual. Like I said it may be specific to model year. For 2008 the 3.7/4.7 part number is a dual hose assembly.
Adam those are directly out of the 2008 manual. Like I said it may be specific to model year. For 2008 the 3.7/4.7 part number is a dual hose assembly.
Oh so I guess it helps to know what year and engine he has!
Edit: first post of this thread says 06 Hemi so my part numbers will be different than his
Last edited by 07JeepXK; 05-01-2014 at 01:45 PM.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
I think I have a copy of the 2006 parts manual at home.... will have to check that out tonight
Matt, did you have a copy of the parts catalog
I do but ive been busy the past two nights. Remebered that we have the links here though.... you can download your own
http://www.theultimatejeep.com/showt...t=parts+manual
Finaly got my superchips and turned off the tpmsNice to not get the message in the EVIC.
Tried finding the part numbers but looks like I'm not a parts guru .....
Ended up ordering 68000978AA & 68000979AA. Same as Matt had found. Looks like these will fit the 06 5.7 also.
With this heat delete, will the rear AC work as normal ?
A bit late but yeah, those are the part numbers for non-rear heat in the 2006 parts manual so you should be good to go
The rear A/C should still work normal, as will the blower motor for air circulation.
Make sure you post up pics!
Finnaly the hoses are inboundwill be doing a lot of work now:
1. Rear heat delete
2. JBA UCA's
3. Brake discs and rotors
4. Front TPMS delete
5. 12 Bolt diff cover
6. Hopefully 285's mounted![]()
07jeepXK, how did you connect the hoses? The hoses is one very short , about 10" and the other is a bit longer. Do you disconnect the two hoses in the engine compartment and connect one of the new ones between the two outlet/inlet and do similar in the back ?
There are currently 3 users browsing this thread. (0 members and 3 guests)