PDA

View Full Version : HD UCA's


bruijr
08-02-2010, 10:00 AM
Recently I was in contact with HM Engineering to order some new pins for my HD UCA's. While talking with them they told me they still had some HD UCA's for the Commander in stock but nobody to sell these for them.
I jumped in to make these available to others in need of some more Heavy Duty parts.

Currently I have two sets at home ready to be shipped and an other six sets coming in the future (have some missing parts which are being fabricated as we speak).

These are the exact same HD UCA's GetLost4x4 used to sell on the "other forum".

I sell them for USD $575 shipped within the US. I will ship worldwide but higher shipping cost are involved so PM me for shipping rates outside the US.
They come with stainless steel pins and grade 8 nuts (see pictures below).

PM me for more information.

https://theultimatejeep.com/images/imported/2010/08/IMG_5841-3.jpg

https://theultimatejeep.com/images/imported/2010/08/IMG_5849-2.jpg

https://theultimatejeep.com/images/imported/2010/08/IMG_5844-3.jpg
bruijr
08-05-2010, 12:49 PM
Currently I have two sets at home ready to be shipped and an other six sets coming in the future (have some missing parts which are being fabricated as we speak).

I set left, ready to be shipped.

Other six sets should be available soon.
LWM
08-05-2010, 01:10 PM
Do you by chance have installation instructions? I am not sure if they came with any but if they did I have mis-placed mine. I cannot remember if there is a right and left and which side is top & bottom.
bruijr
08-05-2010, 02:32 PM
Do you by chance have installation instructions? I am not sure if they came with any but if they did I have mis-placed mine. I cannot remember if there is a right and left and which side is top & bottom.

Jon, I don't have installation instructions and they didn't came with it. You have to install them with the snap ring facing down (as shown on the picture above). There is a left and a right arm. When you compare geometry of the HD UCA's with the stock UCA's I have to say they have a better clearance angle installed the opposite way. Lay a HD UCA on top of a installed stock UCA and you'll see what I mean.
LWM
08-05-2010, 02:36 PM
Jon, I don't have installation instructions and they didn't came with it. You have to install them with the snap ring facing down (as shown on the picture above). There is a left and a right arm. When you compare geometry of the HD UCA's with the stock UCA's I have to say they have a better clearance angle installed the opposite way. Lay a HD UCA on top of a installed stock UCA and you'll see what I mean.

Thanks, Maybe the first to install a set will take lots of photos and we can add it to the "How Too" section.
bruijr
08-05-2010, 02:37 PM
Thanks, Maybe the first to install a set will take lots of photos and we can add it to the "How Too" section.

Once mine are powder coated I'll let you know so we can install them together on our XK's.
LWM
10-12-2010, 04:08 PM
I received a request for information on this item so I am bumping the thread.