PDA

View Full Version : Replaced OME HD springs with Superlift 4" Springs



Matt
06-03-2013, 03:25 PM
Finally got around to installing these springs that Ron was so nice to send me :cool:

In the rear i've been running OME HD springs + 1" spacers. With my full size spare in the cargo space and 3/8 tank of fuel, my fender wells measured as follows:
LF--RF
LR--RR

37.13--37.25
37.50--37.63

So the vehicle was fairly level.... but my overall goal is to get the rear up to 38-38.25 for daily driving since I like to have about 1" of rake.

The superlift springs didn't seem to be side dependent. There was no obvious size difference and both had the same wire diameters. So i went a bit OCD and put the one with the sliiiiightest height advantage on the drivers side. The result was the driver side being almost 1/2" lower. So I installed one of my 1/2 spacers on the driver side.

The end result is:

37.00--37.25, Approx 22" hub to fender
38.75--39.00, Approx 24" hub to fender

So, the rear is definitely higher than I want, but we'll see how it settles. And hell, if only there was a heavy piece of steel I could bolt onto the rear of my jeep to help get those measurements down another 3/4" or so....:p

One thing I really like about this setup is that the springs are still seated at full extension! At the same time, this makes R&R a bit of a PITA... but now when I flex offroad I wont have bystanders saying "hey dude is your spring going to fall out?"

https://theultimatejeep.com/images/imported/2013/06/20130603154959_zps517bd8e7-1.jpg

https://theultimatejeep.com/images/imported/2013/06/20130603160246_zpsaa5818c3-1.jpg

stites-xk
06-03-2013, 03:58 PM
Nice!

Sent from my DROID RAZR using Tapatalk 2

07JeepXK
06-04-2013, 12:26 AM
Hmmm. If only I had more lift in the front. These would go good with the 305's I'd like to order next

Matt
06-04-2013, 05:05 AM
Dude you need to stop putsing around and just get the SL already. With your mods you'll be able to run some 35s and do some serious trails.... and be one of the most capable XKs built to date. Otherwise you're just king of the budget boosts (i consider anything short of a full suspension system as a "budget boost").... get out of the B-league buddy!

06JeepXKHEMI
06-04-2013, 05:46 AM
Dude you need to stop putsing around and just get the SL already. With your mods you'll be able to run some 35s and do some serious trails.... and be one of the most capable XKs built to date. Otherwise you're just king of the budget boosts (i consider anything short of a full suspension system as a "budget boost").... get out of the B-league buddy!

Ouch! Called out Adam!!! If I were keeping the XK I was going SL this spring/summer. I had everything priced out, I could have EASILY afforded it since Ive put over $2500 in the 240 including the cost. But instead, Jeep is headed to my buddies lot for the week as we speak.. Adam, I agree stop bulls**ttin and get the SL or SFA!!!

07JeepXK
06-04-2013, 06:50 AM
Haha I'm not RICH like you guys. Tires will need to be replaced next at over $1200. Superlift on top of that your talking over $3000 total. Matt I don't see a Superlift on your XK lol

Matt
06-04-2013, 07:05 AM
Haha I'm not RICH like you guys. Tires will need to be replaced next at over $1200. Superlift on top of that your talking over $3000 total. Matt I don't see a Superlift on your XK lol

Find some used 35s, put on Superlift and save up for new tires.

Lol im not rich either but ill be putting the superlift on as soon as the new baby is ready for a forward facing car seat!

06JeepXKHEMI
06-04-2013, 07:05 AM
Rich?!?! I have to sell my Jeep so I can move! hahaha Stop making excuses, take a personal loan and get it going!!!!!

07JeepXK
06-04-2013, 07:17 AM
Dude you need to stop putsing around and just get the SL already. With your mods you'll be able to run some 35s and do some serious trails.... and be one of the most capable XKs built to date. Otherwise you're just king of the budget boosts (i consider anything short of a full suspension system as a "budget boost").... get out of the B-league buddy!

I think stites-xk has me beat on this one. He's running my old rear locker with front QD II diff and has the Superlift already. Also TrialByFire has a sick superlifted rig with high clearance bumpers. So I kind of like being one of the most capable XKs with only an OME lift. I'm not making $hit for money at the moment because I'm only part time with the sheriff's dept. I'm waiting on my score from the civil service exam so I can get in full time and make some serious cash. I'll be able to "write my own paycheck" once full time.

Matt
06-04-2013, 07:34 AM
I hear ya man.

Does CJ have his pinch welds cut like yours? Im thinking your rig with ~6" lift and running solid 35s would be one of the largest, most capable rigs.

stites-xk
06-04-2013, 07:37 AM
My pinch welds are beat flat! Once I get 315/70 MT/R's it will be cut out!

Sent from my DROID RAZR using Tapatalk 2

Matt
06-04-2013, 07:54 AM
My pinch welds are beat flat! Once I get 315/70 MT/R's it will be cut out!

Sent from my DROID RAZR using Tapatalk 2

Nice!