PDA

View Full Version : For Sale, 3.73 gears, Front ESID Differential, Front Half Shafts, Rocky Road Upper Am



cmdr jim
11-25-2013, 04:39 PM
For Sell:

New Mopar 3.73 front ring and pinion gears $225 +shipping
Used Front front locking differential w/ 3.55 gears $250 + shipping (Needs 3.73 gears or ready to go with 3.55 gears) 11,000 miles
New Front CV half shafts for front locking differential, $100 for both +shipping


All located in the Richmond, Virginia area.
Email me, [email protected] with questions
I take Paypal.

07JeepXK
11-25-2013, 05:53 PM
When you say ESID locking differential are you referring to the QDII Electronic Limited Slip differential? If so unless you had the 3.55 gears installed in that differential I'm almost 110% positive they all came with 3.73 gears. The only vehicle that came with 3.55 gears is the QT II V6 which are rare.

Also why are you selling all this? I thought you were going to do the gear swap and had everthing set to convert your XK to 4low?

Matt
11-25-2013, 06:08 PM
Also why are you selling all this?

I have a bad feeling we're losing another one....


Jim, what brand are the CV's?

cmdr jim
11-25-2013, 07:15 PM
Yes it has 3.55 gears I installed them and was going that direction until I found out I can't change gears in my Jeep anyway, so if anyone want the front differential and the 3.73 gears they will have an almost new one to activating the front locker with a switch, like we talked about long ago.
I just sold my rear air locker last weekend.
I'm not going any farther with this Jeep. I have the transfercase locking up in high gear by my program but can't get past the Jeep going into limp mode when switched to low range.
Jeep is making these newer Jeeps hard to modify.
I'm keeping the Jeep, just going back a few years to build one up. I'll use this one for on road.

cmdr jim
11-25-2013, 07:16 PM
Not losing, just not building up any more. I'll have to look at the boxes tomorrow and I'll repost on the CV shafts. One side works for all front diffs and the other is for the locking diff.

thance
01-31-2014, 02:53 PM
What year diff is this and does anyone know if it will work in a 2010 QT II? Meaning, will the driveshaft bolt up without an issue?

cmdr jim
03-27-2014, 09:18 AM
This is what is left for sale:

New Mopar 3.73 front ring and pinion gears and the Used Front front locking differential w/ 3.55 gears ( 11,000 miles) You will need to swap in the 3.73 gears.
$350 + Shipping for both, or you can pick up locally