"Modified" Rusty's 2" lift

[Holiday Jones]

I just bought Rusty's 2" springs front/rear, and I want to run the 5100@3/4" up front, and maybe leave the RC 2" spacer in the rear along with the new spring, and use f150 MLL.

Any thoughts?


Sent from my iPhone using Tapatalk

[Holiday Jones]

alright

[Sal-XK]

That might be a bit to much in the front. I would start at the lowest setting and go from their. Also the rear height would put the MLL out of spec.


Sent from my iPad using Tapatalk

[Holiday Jones]

Yeah, I'm using 5125 bilstein s instead


Sent from my iPhone using Tapatalk

[Sal-XK]

Keep in mind that the MLL where for just a two inch lift. So any higher then that and it'll be the same as stock shocks on a two inch lift.


Sent from my iPad using Tapatalk

[Holiday Jones]

Keep in mind that the MLL where for just a two inch lift. So any higher then that and it'll be the same as stock shocks on a two inch lift.


Sent from my iPad using Tapatalk

^^


Sent from my iPhone using Tapatalk

[Holiday Jones]

Using 5100 up front and 5125 out back


Sent from my iPhone using Tapatalk

[Holiday Jones]

2612 Behold, the Modified Rusty's Lift


Sent from my iPhone using Tapatalk

[JustinS]

I like it. I used a RR spacer and bilsteins set at .75 in my old commander