cico7
06-20-2010, 04:19 PM
FLUIDS, LUBRICANTS, AND GENUINE PARTS
ENGINE
Component: Fluid, Lubricant, or Genuine Part
Engine Coolant
Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile (160 000 km)
Formula HOAT (Hybrid Organic Additive Technology)
Engine Oil (3.7/4.7/5.7L Engines)
Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of DaimlerChrysler Material Standard MS-6395.
Oil Filter (All Engines)
Mopar ® Oil Filter (P/N 05281090)
Spark Plugs
Refer to the Vehicle Emission Control Information label in the engine compartment.
Fuel Selection (3.7L and 4.7L Engines)
87 Octane
Fuel Selection (5.7L Engines)
87 Octane Acceptable - 89 Octane Recommended
CHASSIS
Component: Fluid, Lubricant, or Genuine Part
Automatic Transmission
Mopar ® ATF+4 Automatic Transmission Fluid
Transfer Case (3.7L Engines)
Mopar ® ATF+4 Automatic Transmission Fluid
Transfer Case (4.7L/5.7L Engines)
Mopar ® NV 247/245 Transfer Case Lubricant
Axle Differential (Front-Rear)
Mopar ® Synthetic Gear & Axle Lubricant SAE 75W-140 (API-GL5)
or equivalent with friction modifier additive.
Brake Master Cylinder
Mopar ® DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3,
SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
Use only recommended brake fluids.
Power Steering Reservoir
This system requires the use of Mopar ® Hydraulic System Power
Steering Fluid (P/N 05142893AA) or equivalent, which meets
DaimlerChrysler Material Standard MS-10838.
ENGINE
Component: Fluid, Lubricant, or Genuine Part
Engine Coolant
Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile (160 000 km)
Formula HOAT (Hybrid Organic Additive Technology)
Engine Oil (3.7/4.7/5.7L Engines)
Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of DaimlerChrysler Material Standard MS-6395.
Oil Filter (All Engines)
Mopar ® Oil Filter (P/N 05281090)
Spark Plugs
Refer to the Vehicle Emission Control Information label in the engine compartment.
Fuel Selection (3.7L and 4.7L Engines)
87 Octane
Fuel Selection (5.7L Engines)
87 Octane Acceptable - 89 Octane Recommended
CHASSIS
Component: Fluid, Lubricant, or Genuine Part
Automatic Transmission
Mopar ® ATF+4 Automatic Transmission Fluid
Transfer Case (3.7L Engines)
Mopar ® ATF+4 Automatic Transmission Fluid
Transfer Case (4.7L/5.7L Engines)
Mopar ® NV 247/245 Transfer Case Lubricant
Axle Differential (Front-Rear)
Mopar ® Synthetic Gear & Axle Lubricant SAE 75W-140 (API-GL5)
or equivalent with friction modifier additive.
Brake Master Cylinder
Mopar ® DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3,
SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
Use only recommended brake fluids.
Power Steering Reservoir
This system requires the use of Mopar ® Hydraulic System Power
Steering Fluid (P/N 05142893AA) or equivalent, which meets
DaimlerChrysler Material Standard MS-10838.