Fit 4 9" lights on 4xGuard Matrix!
Only had to drill 2 new holes in the Matrix. I used the existing license plate holes for the center support.
Materials to start:
https://theultimatejeep.com/images/i...04110911-1.jpg
Cut a piece of L-Bracket the same width as the license plate:
https://theultimatejeep.com/images/i...04112219-1.jpg
You'll notice in the previous picture that I put the bolts in from the back of the Matrix. Thats so I could use the remaining bolt length for mounting my license plate without actually using the license plate as a load bearing component:
https://theultimatejeep.com/images/i...04112627-1.jpg
I ended up having to cut two slots in the bracket for where the bolts for the lights will come through. Painted it black with a hammered finish.
https://theultimatejeep.com/images/i...01164001-1.jpg
Then I mounted the Thule bar. Leveled everything the best I could. Then drilled two more holes, one through each 4xG upright and put a 1/4-20 bolt through each. This last step made the light bar as sturdy as can be. It's now one "solid" piece with the 4xG.
https://theultimatejeep.com/images/i...01164002-1.jpg
https://theultimatejeep.com/images/i...01164003-1.jpg