SOLD
Printable View
SOLD
Hmmm those wheels look really familiar!!! Where did you get the wheel spacers from to clear the brake caliper brackets on the the front?
Dear Andrew,
Buy this XK!
How many bolts are on the rear diff cover?
Nice looking XK! Too bad you're getting rid of it.
Jon should buy it and transfer all his SA parts, get some decals and make this a company vehicle :cool:
07jeepXK-
I am just running a standard 1/4" spacer. Although I did not like the little amount of stud that protruded from the rim. So I replaced the studs with longer Moroso studs.
Attachment 2174
Attachment 2175
Matt-
It is just a 10 bolt, Quadra-Track II
You have a part number for the studs? I've been looking all over for longer studs! And how did you seperately the wheel bearing like that
Adam, the flange can be removed with a press
I'd be interested in that part number for the studs as well!!
Sent from my iPhone using Tapatalk
So let me correct myself, they are made by Mr. Gasket and the part number is 4311. Here are before and after pictures.
Before:
Attachment 2176
After:
Attachment 2177
07JeepXK-
It is very simple to do, once you have removed all the brake componets then all you have to do is remove the axle nut and there are 3 botls holding the hub in from the rear. A couple taps from a hammer and you can remove it very eaisly. Then I just brought both hubs down to a shop where they pressed out the old studs and pressed in the new ones.
I know how to remover the wheel bearing lol but in your pictures it looks like they seperated the wheel bearing flange from the bearing itself.
Those stud are a little long and wouldn't fit with my lug nuts. I wonder if they have some a hair shorter but still longer than the stock ones