Looks sweet man!
Printable View
Looks sweet man!
K&N is IN! Everyone is right about those instructions... they SUCK, i mean it is just a casserole of nonsense on paper. I eventually just ditched the instructions all together, and looked at the pictures, because the written explanations were GARBAGE... AND i have leftover hardware... nothing makes me more upset than leftover hardware. But it's in, it ain't moving anywhere, but it is hissing... and I forgot why they do that.
Pics below
remove grill
https://theultimatejeep.com/images/i...31041_87-1.jpg
remove this
https://theultimatejeep.com/images/i...1113_466-1.jpg
remove this
https://theultimatejeep.com/images/i...1435_386-1.jpg
and this inlet at the front
https://theultimatejeep.com/images/i...1441_502-1.jpg
temporarily remove this.
https://theultimatejeep.com/images/i...32040_91-1.jpg
put the shield together with all the nonsense that goes with it... and put it in the engine bay
https://theultimatejeep.com/images/i...3136_562-1.jpg
attach tube to air box, put filter on and BAM!
https://theultimatejeep.com/images/i...160735_7-1.jpg
Yup they do hiss a lot don't they.
Sent from my iPhone using Tapatalk
Looks good. K&N's hiss like a pissed off kitty cat.
You gonna have to make a list of the performance mods you've doen dude. I can't keep up! LOL.
It was outside when I first heard it. I started the Jeep and went to check on everything and heard the hiss. Went to grab some groceries, started the jeep again, went to check on it.. Hiss wasn't as loud. And when I got to the parking lot to check a final time, the hiss did not SEEM to be there. Whether it is or not no longer matters to me because I can't hear it while standing at the hood.
I actually reorgnaized my front page a couple weeks ago, so if you check the first page of this thread, they are all actually listed there and it's quite organized :)
Oh my bad. I'll go to page 1. :)
The instructions were terrible. I should have told you to put the heat shield together the night before. That thing was a pain in the butt and took the longest of the whole install. Don't worry about the extra hardware, I had some too.
I get the sucking/hissing sound for a couple seconds on start up, especially when it's cold outside, but it eventually goes away.
Nice to know... I ordered the Drycharger that you and Chris recommended. Should be here tomorrow, and I will slap that on. I saw your review for it on Amazon. You'll feel torque, but you typically won't 'feel' horsepower. Though I guess you could 'hear' it, lol. My kit shipped in today, so i wasted no time doing anything the night before. What actually took me the most time was the upper mounting bracket for the OEM construction of the intake. I had no tools that would actually screw it out.. .my hand-held screws were basically pivoting around the screw... I ended up BREAKING the intake out of my engine bay... and hammering and straightening that tab out. It looks clean and professional. The heat shield took a little bit of time to do, but It wasn't TOO bad... But yeah.. the instructions need help... I don't see them fixing them any time soon since it looks like K&N discontinued this product???
In any case, I can feel the lower RPM pull from the engine, especially around 3000rpm's just around shifts. I'm not sure if this is consistent with your experience. In all seriousness... no BS.... I'm not sure if I would have felt any one of these performance mods individually. But, together, they certainly have an impact on performance - and that was my goal to handle these 285's.