cool, thanks.
Printable View
cool, thanks.
I could use this info as well 07jeepxk
Bump. Realized I need the rivets to install my sliders
I already have a snap-on rivet tool so I'd rather just buy the rivets I need. Harbor freight is also about 45 minutes away.... there's a NAPA store down the street.
Though I just reread the instructions and think I read them wrong the first time.... so its not as crucial for me to get the plastic rivets now for the slider install. But it'd still be good info.
I'm going to see if I can get the info from cross referencing the OEM part number. Lol I can probably get a box of 50 from mcmaster or fastenal for $8
Gotcha. I have a HF 2 miles away so that's the first place I look when I need little BS stuff. Even if you didn't have the tool for the NAPA rivits you could always do the 'ol box wrench and plyers thing to put em in. lol
That's true... those plastic ones are easy
Here is what I used, same as rivets but reuseable.
https://theultimatejeep.com/notfound.png
I think I found the OEM repalcements at mcmaster... part number 90219A340
Here's a link: http://www.mcmaster.com/#90219a340/=dx0jum
Going to order a pack and give it a shot. I like the idea of using plastic rivets... keeps everything nice and tight especially when being vibrated like hell offroad.