Will do, thx for the heads up.
Printable View
Got the Springs in & the RCVs should be here next week. Now just need the remaining 2 missing parts from SL. Should be installed first weekend of OCT.
Painted the new diff cover also.
Attachment 2379Attachment 2380Attachment 2381Attachment 2382Attachment 2383
For scale I used my spare & has no miles on it.
While updating a post I ended up needing to redo that post from 9/3/14.
Tires came in today and here is some of the other items I have in so far.
Still waiting on the RCV Axles, JBA 6" Rear Springs and the 5100's. Also the missing parts of the SL.
I'm not waiting on the 5100's to install everything else. Will just swap in once I get them.
tire info:
https://www.treadwright.com/individu...315-70R17.00-D
Attachment 2386Attachment 2387Attachment 2388Attachment 2389
I'm drooling at the mouth waiting on the pics of these parts installed.
Here is some pics after I went mudding next to work
Attachment 2390 Attachment 2391 Attachment 2392 Attachment 2393
http://www.theultimatejeep.com/attac...achmentid=2393
http://www.theultimatejeep.com/attac...achmentid=2392
http://www.theultimatejeep.com/attac...achmentid=2391
http://www.theultimatejeep.com/attac...achmentid=2390
Attachment 2428Attachment 2429Attachment 2430
Current Hub to Fender
FD 25 1/4" FP 26"
Having the alignment rechecked tomorrow.
Issues I am currently working on.
Once the front passenger side starts to flex the DS hits the gas tank skid
DS Ujoints are whistling and the rubber cover on DS was ripped off when it tagged the gas tank skid. Need to replace the Rear DS, will be looking at Carolina DS or NW driveshafts here in town and going from there.
I went to test everything out on lunch at work yesterday by hitting some mud puddles at the water next to work and now my ABS & BAS/ESP and the TC lights are on. These are the codes it is throwing C1015, B1630, U0415. Will be pulling the front tires on it tomorrow to see if I see anything.
The knocking sounds was the Pas rcv axle & will contact them tomorrow. When the shop swapped it out with the OEM one the intershaft was seized unto the RCV axle. From my understanding it took the mech 45 min with a deadblow to get them apart. The OEM one was put back in & goes in out & out with no issue. The RCV axle came apart when it was being removed as well.
Items still need to do
Swap out the rear diff cover.
Get new front DS
Rear adjustable UCA's & LCA's
Future MODs
Rear bumper
lights
I have had somewhat lifted rigs in the past, this is the biggest I have ever had so still learning. I know there are things that pop up when you MOD a rig, but this is getting annoying. It seems like one thing after the other. Once all is worked out, all should be golden.