Did anyone else see omelet is going to 37s?!? I know he's SL and modified but damn. Adam's doing 34s without SL which is impressive in itself
Printable View
Did anyone else see omelet is going to 37s?!? I know he's SL and modified but damn. Adam's doing 34s without SL which is impressive in itself
This is bad.....im having dreams of my xk with a SL and huge tires. I think ill start buying some scratch offs again.
Sent from my SCH-I535 using Tapatalk 2
Have y'all seen the Trailhawk grand Cherokee that Jeep is bringin to this years easter jeep safari?
Apparently they fit 35's with no additional lift or suspension components, but just by trimming. I'm pretty surprised they could run such a large tire on that rig with no lift.
Better yet, they even swapped in some portal axles on a 4 door JK!
Here's a link:http://blog.caranddriver.com/jeep-an...r-jeep-safari/
I'd so buy a new Grand Cherokee diesel if I could fit my 34 inch MT/R's on it!
^^^
With 420 ft-lb's a torque, you wouldn't have a problem gettin 'em rollin either.
Exactly!
That GC is sick!!!
Do you still have the OME springs for the rear?
I'm lookin to go a similar route as Corey and stack my daystar spacer with these springs to hopefully level out the rear. I'm currently sitting at just over 38" (HD OME/RR 3/16" spacer) in the front and just under 37" in the rear (daystar spacer/ f-150 monroes). If it ends up givin to much rake I'll most likely just cut the front flares a bit to give a somewhat more level look. If you're wanting to get rid of you're old springs I'd be willing to buy 'em off ya.
Sorry bud but they have already been sold and shipped to another member
After flexing out the Jeep I doubt I'll even bother with rear upper and lower adjustable control arms. The rear tires stuff perfectly centered in the wheel well. My bump stops turned out to be perfect length
Awesome. Don't fix it if it ain't broken!
Exactly. There really isn't a need for them and I can think of other things to spend the money on
Incredible job on cutting the bumper and flare. Did you use a manual saw or an electric jigsaw ? How did you clean up the cut ? Looks factory, I have black metallic bumper and flares and hopefully I can get a similar result.
I just used a regular jigsaw that plugs into the wall. I really didn't do anything to clean up the cut as it came out pretty good. This jeep is paid off so I wasn't to worried about it. It's been wheeled had and has seen better days lol