Ok perfect
Printable View
Ok perfect
Here you go man. Basically just take a piece of (s)crap metal, make a few bends, and remount the brake line block a bit further down:
https://theultimatejeep.com/images/i...6cf2a9e9-1.jpg
Ok cool, what size bolt is needed when relocating? I don't have spares laying around..
Sent from my SGH-T999 using Tapatalk 2
I'll have to do this someday as well. Might even take my sway bar off because I think my JKS quick disco's are shot and don't want to spend $180 on a new set. The quick disconnects were one of my first mod before I even lifted the XK. I installed them about 4 1/2 years ago
Honestly I can't remember what size bolts I used.... This was a quick repair I did after my disconnected sway bar links got jammed under the vehicle and bent everything up, so I used whatever was in the junk drawer in my tool box.
I've been meaning to do my driver side and do a nicer job with it. Maybe a job for tomorrow morning..
Fox shocks came today! Can't wait to get these installed, measure 29" eye to eye.. Appearance alone makes these worth it, I'll be doing this, removing rear sway and extending brake lines this week, on top of the things I had listed to be this past weekend. Pics..
https://theultimatejeep.com/images/i...ypunuhar-1.jpg
https://theultimatejeep.com/images/i...a5ery8ub-1.jpg
Sent from my SGH-T999 using Tapatalk 2
You have to measure from the middle of the two eyes on the shocks. I want some!!
Yea I know the other end of the tape measure is in the middle..
Sent from my SGH-T999 using Tapatalk 2
Oh man those are purdy! I want a set!
X2