Sounds like a lot of work. Glad I don't have the Nag1
Printable View
Sounds like a lot of work. Glad I don't have the Nag1
This is the one I use (just under $100): http://www.amazon.com/Mityvac-7201-F...luid+evacuator
There's a cheaper version that doesn't have the reverse flow valve that runs around $60-70.
hey guys, was wondering if you think I should waste the time dropping pan and changing filters?I have 72k , bought it at 65k. just trying to do everything since i don't know the service history. the fluid is very clear
5.7 QD2
so its been 30k and i havent drained and refilled her in that time. i see the manual says 30k for the tranny/tcase and such. i just had all them done at 90k, so i take it i need to address them all at 120k? or you think they can go 50k? i was thinking if anything drain and fill the tranny.
shes just been daily driven, nothing crazy.
The trans is every 60k for the severe duty schedule in my manual.
Tcase is every 30k.... and easy enough to do so I wouldn't stretch that one longer than necessary.
Diffs every 30k too. I dont recall if that was QDII specific because of the clutches though.... QT is just an open carrier so 30k seems a bit excessive.