I think i will eventually paint the side screws black or put a black finish covering on them.
Its very important not to get these too tight during the process or the main bolts on the bottom wont line up.
https://theultimatejeep.com/images/i..._5981JPG-1.jpg
ON my passengers side, i had the whole guard mounting a tiny bit too high and the door rubbed at first. but once i put the main bolts on the bottom it brought it down into place.
https://theultimatejeep.com/images/i..._5988JPG-1.jpg
On one side i tucked the plastic fender well behind it. that pushed the fender flare in a bit and causes a gap. I will mold the plastic with a heat gun and i think this will then be corrected.the other side i let hang for now to test it, but that makes it rub the MT tire when I turn.
https://theultimatejeep.com/images/i..._5985JPG-1.jpg
but they turned out to be well worth the wait!
https://theultimatejeep.com/images/i..._5983JPG-1.jpg