Trans temp? 170-180ish
Printable View
Trans temp? 170-180ish
Engine coolant temp I can't monitor the trans yet :( I was idling for about 5 minuets after running 60MPH for a bit and was up to 215 sitting and about 205 running at 60MPH. I have it idling now to see how hot it gets.
Sent from my iPhone using Tapatalk
Run the heat at full blast for a while to work out any air pockets that formed when you cut those lines. You may have to let it sit and cool for a while, then run it with the heat on again in the morning to purge the rest of the system.
Ok cool the fan kicked on at 218 I think it was and cooled me down to 206 it's about 71 outside right now.
Sent from my iPhone using Tapatalk
@ Sal, i've some some 1/4" spacers if you need some, i'll send them to you for just shipping ;)
Im good thanks man. I need to make these fit on just the 2" lift trying to keep my center of gravity as low as possible and I think the fronts are about good. I'll stuff the rears tomorrow and start on those next.
I also got my track bar installed today. I can't adjust it while it's on the jeep :( its still 1/4" off so I have to take it back off tomorrow make it longer and put it back on.
^Can't you just undo the end with the adjustment, spin it out to whatever you need and put it back on? (with the jeep on jack stands of course)
Edit: maybe not. I haven't installed one yet so who am I to speak, lol.
No I just guessed and made it longer. To get the driver side bolt out I had to jack the jeep up by the frame rail in back a little bit so the spring wood open up but you need to take the passenger bolt out first. You'll see what I mean when your down there. Just measure how it's off and make it that much longer then the stock one. You'll need to jack one side up a little to get the holes to line up once you do that as well.
Sent from my iPhone using Tapatalk