Nice
Printable View
Nice
Here are the pictures from my phone!
Entire front end of XK tore apart to modify the inner fender for 3 inch I.D. flexible HD Hose
https://theultimatejeep.com/images/i...IMAG0178-1.jpg
Air box ready for modification.
https://theultimatejeep.com/images/i...IMAG0177-1.jpg
Modification done to the front of the inner fender behind the passenger headlight to allow the hose to bend toward the airbox since I was missing the 90 degree elbow from the kit
https://theultimatejeep.com/images/i...IMAG0179-1.jpg
A little angle grinder action so the hose off the snorkel could bend properly and route towards the front of the XK inside the fender.
https://theultimatejeep.com/images/i...IMAG0180-1.jpg
Paint
https://theultimatejeep.com/images/i...IMAG0181-1.jpg
Final product.
https://theultimatejeep.com/images/i...IMAG0172-1.jpg
https://theultimatejeep.com/images/i...IMAG0171-1.jpg
Looks really good man. Nice job! Take a video whenever you test it out, lol.
Looks fantastic, you would never know you did not have the entire kit.
Heck Yeah! New template is on its way from Australia! I wonder how long before it gets here??
Exactly, and I even used better more durable hose under the hood to connect the snorkel to the air box.
I wish I had the template and didnt have to make my own. Oh well, everything worked out in the end. Total cost $175, You cant beat that price!
I finished the last stage of the Snorkel install this weekend by relocating the antenna to the drivers side fender. Im very pleased with this kit. If I had to do it all over again and didnt find this snorkel for so cheap I would have had no problem paying over $500 for a full kit from Austrailia. Its so worth it if you ask me.
https://theultimatejeep.com/images/i...IMAG0197-1.jpg
Where can I get the antenna relo kit?
There isn't an actual antenna relocation kit. You just need to un hook the antenna cable from the back of the radio.and pull it out the passenger side fire wall. Then you need to re route it on the drivers side of the jeep through the fire wall and plug the cable back in the radio. Once thats done you need to mark and drill a hole in the drivers side fender at the same spot the antenna was on the passenger side. Its a process that takes a few hours but wasn't hard.