Your rig is looking great
Printable View
Your rig is looking great
Garage Update: I finshed all the overhead light fixtures this morning. I also put up the receptacle covers everywhere except on 2: The 220 volt and one where I need to trim the cover a little to get it to fit. Alas, there are no more wires hanging except where the breaker box goes. That is next :cool:
Also went out for a little photoshoot with the WK. Nothing spectacular, just wanting to show you guys how it sits now.
Front: OME HD Front struts and springs
Rear: 2" spacer lift, Factory springs, Monroe Load Levelers F150 version.
https://theultimatejeep.com/images/i...100_0979-1.jpg
https://theultimatejeep.com/images/i...100_0981-1.jpg
https://theultimatejeep.com/images/i...100_0978-1.jpg
https://theultimatejeep.com/images/i...100_0980-1.jpg
https://theultimatejeep.com/images/i...100_0982-1.jpg
It's a lot more level now. I'm sure you are enjoying this a lot more.
Never live it down!
WK update: I saw AJ's step pad mod and thought I'd give mine a try. After dragging numerous things over this step pad it had several deep scratches. So here is what I wanted to cover up a little bit. I used spray on bed liner (cheap stuff but that's ok with me. I know how to do it right with more expensive stuff later).
https://theultimatejeep.com/images/i...100_0988-1.jpg
So here is the rest of the after pics.
https://theultimatejeep.com/images/i...100_0989-1.jpg
https://theultimatejeep.com/images/i...100_0989-1.jpg
https://theultimatejeep.com/images/i...100_0996-1.jpg
I also worked on a couple of side projects.
Me and my wife are expecting a boy in mid June so I have to get his toys ready. First up is my old pedal tractor.
I painted the trailer and bed lined the inside.
https://theultimatejeep.com/images/i...100_0992-1.jpg
https://theultimatejeep.com/images/i...100_0994-1.jpg
https://theultimatejeep.com/images/i...100_0993-1.jpg
https://theultimatejeep.com/images/i...100_0991-1.jpg
https://theultimatejeep.com/images/i...100_0990-1.jpg
Looks like you did a good job man cool.
Sent from my iPad using Tapatalk HD
The next little side project for our son is my old Radio Flyer wagon. I plan to do the same thing to it, paint it red and bed line the inside. I can't find these original stickers online anywhere but there is a custom graphics shop near my house so I'll go there and have some made.
https://theultimatejeep.com/images/i...100_0995-1.jpg
And that's about it for today. Oh I did replace my tail lights as one was burned out. No pics as that was the easiest bulb replacement I have ever done.
Well done - everything turned out great.