JKS2001 Rear sway bar disconnects
Put my rear sway bar disconnects on today. The only snag I ran into was not realizing I needed to drill out the upper sleeves to 1/2" ID for the bolt.
A quick trip down the street to my buddies house fixed that. Otherwise the install is pretty straight forward.
https://theultimatejeep.com/images/i...c0aa63ff-1.jpg
The stud mount didn't come with a washer. The stock links don't use washers but they use flange head nuts which prevents the nut from digging in when torqued. So i threw a 7/16" washer on there for peace of mind.
https://theultimatejeep.com/images/i...ffcd966e-1.jpg
https://theultimatejeep.com/images/i...88e778c3-1.jpg