My Steel Armadillo Super Sliders finally installed !!!

I received my Steel Armadillo Super Sliders around the end of February , or the 1st of March time frame.

I finally finished installing them, not bad considering how long it normally takes me to finish a project!

The installation went fairly well ( for me!!). I did have one hole I drilled on the front outside passage side that didn’t turn out as well as I would have liked and I didn’t trust the tightness of my Nutsert. Sooo I had a friend weld that attachment point and while the beer was still cold, weld the other three “ outside” attachment points. I then ground the welds and put some seam sealant on them, rattle can and undercoated the areas.

Not sure how well this will work in the long run, but.. I will find out.

I think my welds will work out to be much stronger..


.........Rear.........


https://theultimatejeep.com/images/i...SCN07671-1.jpg



..........Front .......



https://theultimatejeep.com/images/i...SCN07681-1.jpg




Ever since I saw these rock sliders I have wondered how or if the factory rocker covers could be reused/reattached to give it a cleaner look. It would also keep my Better Half happier and when she is happy… well you all know the rest....yes , I get more time to work on my Commander.

So I learned, at least the way I removed them, that I would not be able to reuse them as I had busted most of the plastic “clips”. I was able to use the old covers as a template to experiment with. I tried one that wrapped around the slider (minus the step/logo area), left side, and one that was only perpendicular to the slider and only covered the ends, right side. I ended up going with the latter.
I did get a good deal on a pair of new rocker covers and just measured my old one and cut from its dimensions. Both sides are identical ( but opposite ?). Now I will have to see how long my mud flaps survive !!



https://theultimatejeep.com/images/i...MAG04621-1.jpg




While taking these photos I noticed this “ Shadow” (and no not my fingers on my camera).. Thought it looked pretty sharp..


https://theultimatejeep.com/images/i...DSCN0775-1.jpg

Finished product ..



https://theultimatejeep.com/images/i...DSCN0778-1.jpg


https://theultimatejeep.com/images/i...DSCN0780-1.jpg


https://theultimatejeep.com/images/i...DSCN0779-1.jpg








https://theultimatejeep.com/images/i...DSCN0777-1.jpg



https://theultimatejeep.com/images/i...DSCN0776-1.jpg


https://theultimatejeep.com/images/i...DSCN0782-1.jpg



Of course I have to give credit to my helpers !!


https://theultimatejeep.com/images/i...DSCN0781-1.jpg


https://theultimatejeep.com/images/i...DSCN0783-1.jpg

That looks great, I received a phone call today from a customer who was having some difficulties and I think I will refer him to this thread.

Looks bro! The front can be picky if you don't set it up correctly. Marking your holes with weight of the jeep on them worked great on my two installs

Looks good!

Sent from my DROID RAZR using Tapatalk 2

Quote:

---

Originally Posted by Sal-XK

Looks bro! The front can be picky if you don't set it up correctly. Marking your holes with weight of the jeep on them worked great on my two installs

---

That would have probably helped, I was just slightly off my mark on the front one to feel totally comfortable with it. And Yep the front is picky.

I'm happy I now have them installed and am looking forward to using the extra clearance and protection they provide !!

You'll love them I beat the snot out of mine. :D

looking great

Very nice looking rig!

Looks great! Ive been wondering how to make these work while retaining the stock look.. I like what youve done with stock rockers, if you could post how many inches you trimmed off of the, Id like to steal you mod!!!

very clean!!

Thats a beautiful looking XK, one of my favorites for sure.

That looks awsome!

Quote:

---

Originally Posted by 06JeepXKHEMI

....., if you could post how many inches you trimmed off of the, Id like to steal you mod!!!

---

I'm currently " on the road " and will not be able to give you a measurement until around the end of the month, and that should get you in the ball park ( remind me via PM if I forget ..LoL).

Once I decided on the straight cut, the measurement worked for both sides and is approximately 1/8 to 1/4 above the slider. I played around with the ends also on my old pair that I was using as a template until I got the look I wanted. But I'm also not very artistic ! I'd recommend also using your old rocker to get the exact fit and look you want. Cutting the old ones also gave me practice with cutting them, so I minimized my chances on messing up the new ones.

I also had the new ones painted to match the Commander as I thought it might look better than having three slightly different colors in a small area ( body, plastic rocker and then the slider.. also cut them first before painting). I was surprised how it almost looks like it came from the factory that way.

If someone makes a template I would love to include it with future orders as an option.

Quote:

---

Originally Posted by 1USMC

I was surprised how it almost looks like it came from the factory that way.

---

Definitely love that look of stock.. 07JeepXK and I were talking about that this weekend, you put the sliders on there are mounting holes for the rockers that were left open and were discussing a way to fix that and this is PERFECT! Whenever you get around Id appreciate it, sliders are in the very near future!

Really wish I didn't get the 4XG's when they had that inventory sale (but it was the right decision at the time).... I really like that SA slider setup.

Great looking sliders and awesome XK....also one of the nicest I've seen yet. I have a Golden Retriever as well, great dogs.

Looks very well done.

I keep coming back and looking at this thread, feel like Im stalking a fine girl this looks so good..

Quote:

---

Originally Posted by 06JeepXKHEMI

I keep coming back and looking at this thread, feel like Im stalking a fine girl this looks so good..

---

Nice LOL

Quote:

---

Originally Posted by 06JeepXKHEMI

........ if you could post how many inches you trimmed off of the,

---

...



It looks like from the top horizontal surface to my cut its approximately 1.6 to 1.7 inches. Here is a photo so you know how I came up with this #.




https://theultimatejeep.com/images/i...IMAG0780-1.jpg

Quote:

---

Originally Posted by Knappster

If someone makes a template I would love to include it with future orders as an option.

---

I'm always a day late and many dollars short !! I ended up tossing both of my old ones or I would have sent them out to you ... Thinking perhaps a junk yard would be a good way to go to get one to make a template from, if others that have the SA Sliders have already tossed theres also.

Quote:

---

Originally Posted by Core XK

..... I have a Golden Retriever as well, great dogs.

---

Yes.. Great.. we had three !! ( we leave the vacuum out )..I had noted your's earlier also ...great jogging buddies and they are indoor dogs and just like a member of the family...They have us trained well !!

Quote:

---

Originally Posted by 1USMC

Yes.. Great.. we had three !! ( we leave the vacuum out )..I had noted your's earlier also ...great jogging buddies and they are indoor dogs and just like a member of the family...They have us trained well !!

---

3 is definitely a handfull. LOL yes my fiance and I are trained well too. When we first got him we said to each other "He is NOT sleeping in the bed".......we wake up to a hot breathing 75 ib fur bag every morning!

But yes they are amazing dogs. I have had all different breeds my entire life growing up and I would never get anything else again :)

Attachment 1547

if it helps I still have the factory plastic covers, if they will help you let me know.