Printable View
I have a used Daystar spacer lift that was just taken off my XK for sale. Comes with everything needed to mount and install. Asking $100 shipped,pictures coming later today, pm me with questions/offers.
Whole Kit
Attachment 1515
Front assembled
Attachment 1516
Font un-assembled
Attachment 1517
Rears
Attachment 1518
Attachment 1519
Interested in these only for the rears to add to my OME. Are the rears actually 2" spacers, or smaller? Just wondering if I need to grind them down or not.
I havent measured them they look actually thicker than 2", however I dont really have an interest in seperating the rears since no one will want just the front spacer lift
For the price I was thinking of buying the whole thing. Think you could measure?
I was wrong it measures just a hair under 2", guess it just looked bigger.. Let me know I can get these sent out right away if you want it
Hey would you mind measuring the ID and OD of those rear spacers? Specifically the bottom portion that mates with the vehicle/axle perch.
Inner diameter and outer diameter?
Yup. :)
Outter- 6 5/8"
Inner- 3 1/8" but there is a lip and that measures 3 3/4" Here's a pic to show lip Im referring to..
Attachment 1522
Perfect man thanks! That's exactly what I was looking for.
Quote:
Originally Posted by Matt
ummm Matt. Keep in mind that rear spacer was mounted above the rear coil. Not below like the ones your making!!!
I'm making spacers for both upper&lower so I can get 1" ;)
Also OEM upper/lower isolators are the same p/n so I'm expecting needing a similar chamfer for the bottom.
Are we good to go w/ spacers Sat?
Of course.
Oh I see. You didnt mention that earlier.Quote:
Originally Posted by Matt
Hey man, do you want the lift? I have to run to FedEx tmrw or Friday to send some things out to Fla and could do this at the same time if you are still interested. Let me knowQuote:
Originally Posted by Static
Still thinking. I may go with rustys since no cutting is involved.
What cutting is involved with the daystar lift?? Never heard of that before
He's taking about cutting down the rear spacer to 1.5".
Oh, didnt see that anywhere in the thread??
Read post #2 :p
Huh? that doesnt say anything aout 1.5 inch spacers. That just mentioned something about grinding them down. But he really never mentioned why he wanted to do that.Quote:
Originally Posted by Matt
He wants just the rear to add to the OME and if they're 2" he needs to grind them down... so that was the "cutting" he was referring to.
^^all from his post in this thread :p
I got the 1.5" from a post he made in another thread.
Matt is correct :)
damn straight
https://theultimatejeep.com/notfound.png
Yea yea, I didnt get a chance to read his other thread. I was to busy buying parts....