I didn't see it covered anywhere... I priced out the 18 plastic pop rivets for the front fender liners at the dealership... yikes! over 80 bucks... at wholesale price!!
Has anyone found an alternative that looks close to factory?
Printable View
I didn't see it covered anywhere... I priced out the 18 plastic pop rivets for the front fender liners at the dealership... yikes! over 80 bucks... at wholesale price!!
Has anyone found an alternative that looks close to factory?
If you have one you can take it to Napa or another flaps. They can match it up close enough.
You can also check lowes as well in the hardware department they have automotive section with a bunch of clips pins just an assortment of random stuff
I'll take a look... thanks!
Fosh69,
This is off subject but I see that you are from Colorado. Next week we are having the West Coast Camp Commander at Buena Vista, Colorado. Check out the link if you have not already.
I picked up the rivets and a rivet gun at Harbor freight for about $20.00
Show up at Camp and I'll give you rivets and install them for free. If not I use Fastenal Au-ve-co 14023 is the part number. $10 for a box of 25.
Yes, Harbor Freight and their POM rivets.
Assortments:
http://www.harborfreight.com/catalog...lt?q=pom+rivot
The $15 tool: (With a few POM rivets thrown in)
http://www.harborfreight.com/catalog...pom+rivet+tool
thanks fellas!
Napa has the exact rivets for $7. Comes in a box of 20. Ill get you the part number later.
cool, thanks.
I could use this info as well 07jeepxk
Bump. Realized I need the rivets to install my sliders
I already have a snap-on rivet tool so I'd rather just buy the rivets I need. Harbor freight is also about 45 minutes away.... there's a NAPA store down the street.
Though I just reread the instructions and think I read them wrong the first time.... so its not as crucial for me to get the plastic rivets now for the slider install. But it'd still be good info.
I'm going to see if I can get the info from cross referencing the OEM part number. Lol I can probably get a box of 50 from mcmaster or fastenal for $8
Gotcha. I have a HF 2 miles away so that's the first place I look when I need little BS stuff. Even if you didn't have the tool for the NAPA rivits you could always do the 'ol box wrench and plyers thing to put em in. lol
That's true... those plastic ones are easy
Here is what I used, same as rivets but reuseable.
https://theultimatejeep.com/notfound.png
I think I found the OEM repalcements at mcmaster... part number 90219A340
Here's a link: http://www.mcmaster.com/#90219a340/=dx0jum
Going to order a pack and give it a shot. I like the idea of using plastic rivets... keeps everything nice and tight especially when being vibrated like hell offroad.
can the normal rivet gun work or need a special one for the the plastic rivet?
thank you sir
OEM replacements (McMaster part number 90219A340):
https://theultimatejeep.com/images/i...07194507-1.jpg
Thanks, Matt!
Sorry for the late respose. I was gone playing Army! Here is the Napa part number: 7702871