SOLD
Printable View
SOLD
Hmmm those wheels look really familiar!!! Where did you get the wheel spacers from to clear the brake caliper brackets on the the front?
Dear Andrew,
Buy this XK!
How many bolts are on the rear diff cover?
Nice looking XK! Too bad you're getting rid of it.
Jon should buy it and transfer all his SA parts, get some decals and make this a company vehicle :cool:
07jeepXK-
I am just running a standard 1/4" spacer. Although I did not like the little amount of stud that protruded from the rim. So I replaced the studs with longer Moroso studs.
Attachment 2174
Attachment 2175
Matt-
It is just a 10 bolt, Quadra-Track II
You have a part number for the studs? I've been looking all over for longer studs! And how did you seperately the wheel bearing like that
Adam, the flange can be removed with a press
I'd be interested in that part number for the studs as well!!
Sent from my iPhone using Tapatalk
So let me correct myself, they are made by Mr. Gasket and the part number is 4311. Here are before and after pictures.
Before:
Attachment 2176
After:
Attachment 2177
07JeepXK-
It is very simple to do, once you have removed all the brake componets then all you have to do is remove the axle nut and there are 3 botls holding the hub in from the rear. A couple taps from a hammer and you can remove it very eaisly. Then I just brought both hubs down to a shop where they pressed out the old studs and pressed in the new ones.
I know how to remover the wheel bearing lol but in your pictures it looks like they seperated the wheel bearing flange from the bearing itself.
Those stud are a little long and wouldn't fit with my lug nuts. I wonder if they have some a hair shorter but still longer than the stock ones
Oh ok, picture is probably just a funny angle. The studs come in all different lengths, I'm sure you could find the length you need.
Awesome thanks! Could really use some longer studs to feel safe with the new 34" MT/R's I just got installed
34's on an XK?!?! You GOTTA post pics!!! :cool:Quote:
Originally Posted by 07JeepXK
Check out my thread "Go big or go home" I have a few pics in there of the new 34's on the XKQuote:
Originally Posted by The_War_Wagon
Ya' know... about a second after I pushed "POST," I suddenly thought - "I wonder if that's what that thread is about?" :rolleyes:Quote:
Originally Posted by 07JeepXK
Damn... a 6 foot lift...! ;)
Sent from wherever my Jeep takes me.
Haha so I wasn't the only one that noticed thatQuote:
Originally Posted by lekmedm
Quote:
Originally Posted by lekmedm
Quote:
Originally Posted by 07JeepXK
What?!?! You guys have never seen a Jeep with 6 feet of lift?!?! :p
https://theultimatejeep.com/images/i...sterjeep-1.jpg
Hey I recognize that Jeep. It belongs to my good friend Paul !!!Quote:
Originally Posted by The_War_Wagon
https://theultimatejeep.com/images/i...ps5ccbbf-1.jpg
https://theultimatejeep.com/images/i...09227d24-1.jpg
Quote:
Originally Posted by 1USMC
Didn't he used to work for Royal tires - before he ran off to MN and became a hippy? :p
https://theultimatejeep.com/notfound.png
Yaa Yaa Thats Him !Quote:
Originally Posted by The_War_Wagon