Good to hear everything is working, for the most part.. If It's not leaking or broken then It's no fun, remember that!
Sent from my SGH-T999 using Tapatalk 2
Printable View
Good to hear everything is working, for the most part.. If It's not leaking or broken then It's no fun, remember that!
Sent from my SGH-T999 using Tapatalk 2
Good work on the TJ!
Hey a TJ build Lol.
Looks good man. Did you make sure to add a drop pitman arm since you used the track bar bracket. Otherwise you will get some wicked bump steer.
http://www.jeepforum.com/forum/f22/noob-build-1395973/
Here is my ****ty TJ build.
Ricky didn't have the drop arm for it. I was kinda wondering the same thing. But it's his TJ and his parts. I just put them on lol. HE did drive it yesterday and said that everything was doing great so he may be used to the bumpsteer, lol.
He did say that the coolant is leaking from the weep hole so it looks like he needs a new water pump.
I'll take a look at your TJ build.
Thanks for all the kind words guys.
Great Job
Thanks pj
I was looking of the wk yesterday and starting jerking on the driver side spindle because the UCA looked a little funny on the ball joint. Sure enough, the uca is about to go. I could move the spindle and the uca ball joint moves and makes a clunk. And this is with the jeep on the ground. SO I guess I'll look into the JBA uca's.
"jerking" may be a poor word choice. I pulled the spindle.
I definitely recommend the JBA UCA's!
Upon further investigation, it seems that the uca's are ok. I lifted each front wheel and did my best to move it. I couldn't get them to move or make the clunk that I thought they were making the other day. Going to URE on April 13 so I'll put them through a good test then and see what happens.
On the WK I put on my season pass sticker for URE and a NC4x4 sticker (a local forum that I'm on).