Vehicle Needed - Hidden Winch Mount Installation / Keystone Brush Guard Test Fitting

Slightly bigger bit then whatever your trying to drill out. I thought people were cutting the cross member out?

Drilling is much cleaner but it does take some work as you have to step up the drill bits unless you have one of the ones with many different sizes all-in-one.

They were a bit pita :( did you reuse the holes on the bottom or drill new ones ?

Quote:

---

Originally Posted by norwaywj

Anybody got pointers on drilling out the spot welds ? Really struggeling with them. Need the crossmember off so I can start mounting the hiddden winch

---

I cut off the cross member with a sawzaw.... quite easy. I cut the frame rails parallel to the cross member about 1/2" back. See the link to the custom plow mount in my sig.

Quote:

---

Originally Posted by thance

I cut off the cross member with a sawzaw.... quite easy. I cut the frame rails parallel to the cross member about 1/2" back. See the link to the custom plow mount in my sig.

---

Here is a direct link to the post:

http://www.jeepcommander.com/forums/...1&postcount=16