How do I turn my Fog lights on? I cant figure it out.
Printable View
How do I turn my Fog lights on? I cant figure it out.
The stock fog lights are on the MFS you just pull out and they should come on. I think you need to at least turn the parking lights on first though. Oh and it's to easy to make fun of you on this one bro LOL
Put the switch in the on position.. geez..
(but yea it's on the multifuction switch with the headlights, turn signs and everything else..)
Ok I tried everything on that. Maybe it is jammed or they are not hooked up. I can see what I thought I was supposed to do, but after ten minutes i gave up
If they were added after the fact I believe you have to go to the dealer and have them enabled. If not maybe the switch is bad, bulbs are burned out, connections are loose?
If the very tip of the MFS comes out about a 1/8" then that's it if there still not working there is something else wrong. Did you add them? or did they come stock? If you added them I believe you need to program the relays with the scanner to activate them. If there stock check the fuses first then I would start at the lights with my meter and keep tracing them back till I found power
If your brights are on they won't come on either.. There should be a green fog light emblem on the dash lights that turns on if they are on..
You also have to have the lights on to turn on the fogs. If the lights are off, you can't pull the end out. Likewise, if the fogs are on you can't turn the knob all the way to turn the lights off.... you have to turn the fogs off first by pressing the end back in
If they were added do you have the right MFS stalk? I believe the ones without fogs have a different stalk.
They were on the Jeep when I bought it. I had a couple Bud Heavys and fell asleep on the couch last night, I will check tonight.