Just double-stack it and slip on some 35"s I have been like this for like 2 years and no problems....
Type: Posts; User: bigmaninds
Just double-stack it and slip on some 35"s I have been like this for like 2 years and no problems....
I would recommend it for sure, I found about it in North Carolina when I was stationed there, old farmers put it in their tractors. I put it in my Dodge Stratus and I had 265,000 miles on it when I...
You can run 35's if you want to cut I mean a lot of cutting
https://theultimatejeep.com/notfound.png[/IMG]
I had these sliders made here in Phoenix, I like them because they angle up and they can be used for steps also they have seen some good hits and stand up pretty well, I had them made at a fab...
Weigh out the pro and cons and see which decision would make more sense. Follow your gut instinct...
Well I bit the bullet and bought me a 2004 Jeep Wrangler Unlimited. I wanted something that I had more options on aftermarket gear. I did not sell my Commander and planning to do some crazy things to...
I called this place called Randys Ring & Pinion and they say they have gears for the Commander front and rear. They send me an email with gears (4.56) and the master install kit. They say it will run...
This is what happens to the front as well with too much travel, I have both front and rear sway bars removed. I do have Old Man Emu suspension so stiffer springs...
I just looked it is very torn, I also looked closely at the front drive shaft, the area where it connects to the transfer case, I can see shiny ball bearings? Are those ball bearings that I can see?...
Today I was driving and then I was turning and heard an awful sound. So I went to park came out and inspected it. Found nothing drove home and sound did not come back. Crawled under it to inspect and...
I want to say somewhere around 350 - 400. I did take the plastic piece out and that is where the square tubing went. They were awesome listening to everything I wanted on my sliders.
Yes I have hit them before on the bottom side, but on the tube side I don't think so because of the angle. The square tubing usually takes the blunt force.
These are my sliders I have had them for a while, they were made by Articulated Motion in Phoenix.
https://theultimatejeep.com/images/imported/2011/05/photo12-1.jpg...
Yes they are the BFG's AT KO's, the sliders are from a shop here in Phoenix, Articulated Motion. Took out plastic piece and they go out 6 inches with an angle, the door misses the sliders by like 1.5...
I think 35's
I bought some 315 70 17 for my Commander. I wonder if it was a bad idea. They do rub but I can live with it. The jeep is up high now, I love it....
I would like to share with you I am finally graduating Arizona State University. After 6 years of going to school off and on I am graduating May 4, 2011 with an BAE in Elementary Education. During my...
oh yeah I forgot, no sway bars up front or in rear... if I put the on I am thinking that it might stop rubbing....
Hope it was ok to borrow that pic....
I do believe they are longer just not too much
https://theultimatejeep.com/images/imported/2011/04/l_7b58682b6adbc2caa17c37056d081abc-1.jpg
OME HD springs with 3/8 inch spacer on top of strut up front, rear OME HD springs with 2 inch spacers on top of the springs.
Today went wheeling and found this damage. I do not know how long it has been there but was like Woah! I know when my front tire falls all the way down this happens, is there a way to cure this? Any...
I do have to say iphone. I am a Verizon customer and I did check out the android but was not impressed with it so I got the iphone. The features that I like are that my home computer, my work...
Some good places IMO are Willow Springs lake, Woods Canyon, and Christopher Creek all near Payson. Check this site out for some camping near Prescott. http://www.fs.fed.us/r3/prescott/index.shtml
If...
Looks good. Like it. :) That roof rack is super nice, same shop that made the rack?