I noticed after my first drive with the new shocks a 'clunking' which I kinda knew what it would be but I wanted to see what it would do. I don't know if the XK's have this problem. But some of the wheel well plastic gets awfully close to the shocks. Anyway, anytime I went down a dip, where the shocks have to respond quickly - The plastic would actually have noticeable contact with the coilovers. So I had to trim this down. I ran out of Daylight to tighty this one up, but I'll get to it tomorrow... Oh I will!
The Issue:
As you can clearly tell, plastic is too close. And yes, I can see that rubber boot slowly making it's way down the shock - I'll have to consult Sal with that one - because I'm not pulling that side shock off, lol. Was a PITA
Solution!
Dremmel Tool, extension cord, power inverter
A minor set back:
So I've removed the majority of what I need but have not actually removed the piece yet. Well I let my hand down briefly, and tap the disk on the tire and it snaps in half. I kinda laughed because stuff like this happens to me all the time.
But I was prepared!!!
Nearly done
As I said, I ran out of daylight, but I plan to tighten up the 'finish' so that it looks a little more professional.
I purchased the quick release system for my dremel look into it its pretty nice.
I vaguely remember your Dremmel tool - I'll have to check it out again when I come up there - hopefully SOON!
Sounds pretty good!
Sent from my iPhone using Tapatalk
Link is secure. thanks man!
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
Here is the Youtube link - For those who aren't on my FB account.
Last edited by AJeepZJ; 01-31-2012 at 08:50 PM.
As Promised! Hypertech Max Energy
As you can tell Jon - There is a spot on this window... it's got Steel Armadillo all over it.
1 of my 3 expected toys arrived today. Got my Hypertech Max Energy Programmer. Took all but 30 mins to update the programmer with the provided disk. And then program the 3.7... This thing... will pay itself off by the end of spring, lmao! Pics below.
A feature it HAD to have for me was at LEAST this
Final updates
MPG test (I cleared the MPG calculater, drove around at about 45-55) not quite city, but not HWY speed either)
Might have to try this out, just for the mpgs!
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
There are currently 1 users browsing this thread. (0 members and 1 guests)