2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
I just cannot say enough about how steep this descent was. No spotters, and I had to fold in both mirrors to keep from hitting. At on point I was ballanced on two wheels and was touching trees front and back. Little scuffs on the bumper but not horrible. At the bottom of this was a wash, and there was never a point were all four wheels were down. Couldnt go back up that hill, so just kept pushing on. The Rubicon LJ got a flat, I need a new rim, dented the gas tank really bad, crushed the rear corner again, and added some new pin stripeing. Drove the two hours home fin and looks like new after a good wash and wax. I am exhausted
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
LMAO I remember the first time I dented mine or felt like I was in over my head. You made though that's the important thing. Now you know why I painted my bumpers and wheel wells and will paint the bottom of my doors to.
Very nice. Repping the XK in a world of Wranglers!
You have to admit it feels good that you kept up with them.
For sure, and it is good to hear how impressed everyone was too.
Not really any great pics, but oh well
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
My stock wheels look like yours (damage pics) but maybe a bit worse. I'm missing several bits of the outer lip on several wheels. It's really time to get some new ones but i keep putting it off. I don't notice a difference in balance or anything. I've got no money to spend on stuff for the time being though. Looks like you had fun. It's a thrill to ride these commanders around in comfort and on trails you'd never have thought possible. Thanks for the pics.
2007 Commander 4.7L, QTII, OEM Towing Option, tow hooks, 2"OME + 1/4" rusty's leveling spacer, Bilstein 5150 Rear Shks, Rear sway bar removed, 4xguard front skid, Offroad Unlimited Defender Roof Rack, Hella 500FF lights, 265/70/R17 BFG KM2 M/Ts 1.5" Rough Country Wheel Spacers
http://www.theultimatejeep.com/showt...acerc-s-Garage
Yeah it really challenges your driving to keep from trashing the body, lol. I will probably just keep the wheel as is until i HAVE to change it.
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
