Fox Shocks for Rear

[Matt]

Just doing some research... figured i'd document my findings here.

Looking to see what shocks can be run with a ~2" lift.

Note that from my gas tank install thread i found that my coil spring came loose at an eye-to-eye measurement of 26.5". so 26-26.5 is an ideal extended length to not require limiting straps (with an RC spacer lift anyways... not sure if that's true for OME spring lifts). Also, stock rear shocks are about 24.25" extended and 15.25" compressed.

2.0 Emulsion:~$140/each
Product Details Here



Part Number: FOX 980-02-025-A
Black and zinc finish
Body diameter: 2.0"
Travel: 10.0"
Shaft size: .625" diameter
Extended length: 26.10"
Collapsed length: 16.10"

Part Number: FOX 980-02-038-A
Black and zinc finish
Body diameter: 2.0"
Travel: 11.0"
Shaft size: .625" diameter
Extended length: 28.10"
Collapsed length: 17.10"




2.0 Remote Reservoir: ~$190 each
Product Details Here


Part Number: FOX 980-02-032-A
Black and zinc finish
Body diameter: 2.0"
Travel: 10.0"
Reservoir length: 2.0" x 8.00"
Shaft size: .625" diameter
Extended length: 26.10"
Collapsed length: 16.10"


Part Number: FOX 980-02-039-A
Black and zinc finish
Body diameter: 2.0"
Travel: 11.0"
Reservoir length: 2.0" x 11.00"
Shaft size: .625" diameter
Extended length: 28.10"
Collapsed length: 17.10"