Once i got it folded over a bit using the vice grips, it bent the rest of the way easily using a 3lb sledge. Not very hard to do at all.
Once i got it folded over a bit using the vice grips, it bent the rest of the way easily using a 3lb sledge. Not very hard to do at all.
hahahahahaha... i was going to say man, a 10lb is a bit overkill!!
Yeah, a 5 lb will work just the same
Matt,Nice write up!Getting ready to do this myself.. Another little trick I did with my XJ when I cut and folded my pinch welds. Glob up the folded over pinch weld with some silicone,before and after you fold it. Then hit it with a can of undercoating. It just makes sure no water gets into the weld and it starts rusting!!
Frank..
06 Hemi Limited,black,QD2,elsd,loaded minus back up camera,OEM hitch with 7pin harness. RC 2"lift,BFG Rugged Terrains 265x70x17(31.7"),1 3/4" Rugged ridge wheel spacers(front), 4xguard Matrix Pushbar and Grill Hoop,4xguard rockrail/sliders,4xGuard 12 bolt diff guard,6"Hella 500 Black Magic Driving lights.
There are currently 1 users browsing this thread. (0 members and 1 guests)