Yep thays helps. Thanx for the info guys. I just dont want to spend money on rims and mess them up wheeling. Id rather get beadlocks thay ate made for abuse ya know...
Yep thays helps. Thanx for the info guys. I just dont want to spend money on rims and mess them up wheeling. Id rather get beadlocks thay ate made for abuse ya know...
JBA
4XG
S4XC
I would go with the Stauns. http://www.performance4trucks.com/Wh...ct&emlprox=out
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
Greg who was on the last trip with us has run the AEV Pintler Beadlocks for a couple of years now, with no issues. Probably round 30000kms on them. No vibration issues etc. His property is a couple of hundred acres and he uses it to run all around that and run his horse transport around.
Dave
2007 WH Grand Cherokee CRD QDII - 3" Exhaust, GDE Flash Tune, CRDSTU Hybrid Lift & bash Plates, 4xGuard Rock Rails & Rear Sliders, Saguaro F&R Bars, Warn 9.5CTI-s, AEV Saverge Rims, 35" KM2's, Snorkel, Custom Rear Drawers, ARB Dual Compressor + On Board Air, BullyDog Monitor, Dual Optimas Front and Dual Rear Aux Batteries YouTube Vids
I was jist looking at them. I like them alot and he usea thay as a dd?
JBA
4XG
S4XC
It says they have been discontinued for the wk's
JBA
4XG
S4XC
Yeah its his DD. You can still get them in the JK offset, which is what my Savegres are. His are the WK offset.
Dave
2007 WH Grand Cherokee CRD QDII - 3" Exhaust, GDE Flash Tune, CRDSTU Hybrid Lift & bash Plates, 4xGuard Rock Rails & Rear Sliders, Saguaro F&R Bars, Warn 9.5CTI-s, AEV Saverge Rims, 35" KM2's, Snorkel, Custom Rear Drawers, ARB Dual Compressor + On Board Air, BullyDog Monitor, Dual Optimas Front and Dual Rear Aux Batteries YouTube Vids
How does the backspacing compare? B.c. it says for lifted jk's ill be running the kba 6-8" lift any day now and i knoe when u install the superlift they say you need a different backspacing
JBA
4XG
S4XC
There are currently 1 users browsing this thread. (0 members and 1 guests)