2007 Commander Overland / 4" SuperLift / 285/70R17 Cooper Discoverer ST Maxx / Rusty's adjustable rear UCAs / Carolina Driveline front drive shaft / Flashpaq / DRLs & Tilting Mirrors / Autolite Iridiums / Cobra 29LX Chrome LE CB & Firestik antenna / Rear fog lights / Mopar Grille Guard with HID driving lights
"4 wheel drive does not mean 4 wheel stop!" -Lee Goldberg, WABC TV weatherman
'07 3.7L, 255/75-17 BFG MT, 2" Rough Country lift, 1.5" Spidertrax spacers
My Garage
Finally got a chance to finish the basket.
I didn't get any pix of the paint stripping, but it wasn't that hard. Just took a lot of time.
The paint was flaking off so badly, I was able to get most of it off with high pressure air.
Most of what was left came off with a good carbide paint scraper.
The scraper really scratched/gouged it up, but I used a wire wheel on a die grinder as the last step and that smoothed everything back out.
The wire wheel left the surface nicely roughed up so after a wipe down with acetone, I primed it with Aluminum primer.
Once that dried, It got several coats of DupliColor Spray on Bed liner.
I like the texture.
Then back on the Jeep.
I also sprayed the UniTrack with PlastiDip. I don't know if it will hold up, but if it doesn't, I'll peel it off and use bed liner.
It looks kind of small up there. I think it needs something to add some length.
Lights or an air deflector maybe?
'07 3.7L, 255/75-17 BFG MT, 2" Rough Country lift, 1.5" Spidertrax spacers
My Garage
Good job man! It looks a little small up there just throw on a light bar and you'll be good
Looks great
PJMJR508
(Happy Jeep)
There are currently 1 users browsing this thread. (0 members and 1 guests)