Nice job man!!!!
Nice job man! I used a single bolt that captured the lip inside the rail then wen't threw the hole on the unistrut. Also since unistrut is made to hang bars from just measure the tube or bar on your roof rack and get the size pipe mount for unitstrut you need to easy bro keep up the good work. We love to see mods not out of a catalog around here
Nice Jeep bro, love that color!
Nice job on the cross bars.
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
Thanks all.
Already have the unistrut 3/4" mounts, but the side rails are square and I'm not liking how they hold. I may just bend them up a bit or,
I think I'm going to pick up a bunch of the unistrut nut thingies with the springs on the back and try to use the brackets that were on the old crossbars.
'07 3.7L, 255/75-17 BFG MT, 2" Rough Country lift, 1.5" Spidertrax spacers
My Garage
2007 Commander Overland / 4" SuperLift / 285/70R17 Cooper Discoverer ST Maxx / Rusty's adjustable rear UCAs / Carolina Driveline front drive shaft / Flashpaq / DRLs & Tilting Mirrors / Autolite Iridiums / Cobra 29LX Chrome LE CB & Firestik antenna / Rear fog lights / Mopar Grille Guard with HID driving lights
"4 wheel drive does not mean 4 wheel stop!" -Lee Goldberg, WABC TV weatherman
'07 3.7L, 255/75-17 BFG MT, 2" Rough Country lift, 1.5" Spidertrax spacers
My Garage
Finally got a chance to finish the basket.
I didn't get any pix of the paint stripping, but it wasn't that hard. Just took a lot of time.
The paint was flaking off so badly, I was able to get most of it off with high pressure air.
Most of what was left came off with a good carbide paint scraper.
The scraper really scratched/gouged it up, but I used a wire wheel on a die grinder as the last step and that smoothed everything back out.
The wire wheel left the surface nicely roughed up so after a wipe down with acetone, I primed it with Aluminum primer.
Once that dried, It got several coats of DupliColor Spray on Bed liner.
I like the texture.
Then back on the Jeep.
I also sprayed the UniTrack with PlastiDip. I don't know if it will hold up, but if it doesn't, I'll peel it off and use bed liner.
It looks kind of small up there. I think it needs something to add some length.
Lights or an air deflector maybe?
'07 3.7L, 255/75-17 BFG MT, 2" Rough Country lift, 1.5" Spidertrax spacers
My Garage
Good job man! It looks a little small up there just throw on a light bar and you'll be good
Looks great
PJMJR508
(Happy Jeep)
What rack? Did I miss it somewhere?
There are currently 1 users browsing this thread. (0 members and 1 guests)