The Steel Armadillo Super Sliders are now available for sale, they will run $449.95 plus shipping and you can add the optional step and powder coating.
The Steel Armadillo Super Sliders are now available for sale, they will run $449.95 plus shipping and you can add the optional step and powder coating.
Last edited by Knappster; 11-26-2011 at 03:40 PM.
What do we need to add? Is what's in the picture the what we get?
The sliders are as seen in the photos and come with 8 nutcerts and the 8 bolts to hold them on. We will provide instruction on how to install the nut certs after you drill 8 holes, you then bolt them on and are ready to go.Originally Posted by Sal-XK
The sliders come bare metal and you can paint them or powder coat them locally or we can have them powder coated here for an additional charge.
You can have us add the step plate as an option prior to shipping as well (I will post a photo of one with a step this week as well).
ok got it thanks bro and good job launching at a decent price as well.
Looks great Jon!
Last edited by Knappster; 12-13-2011 at 08:42 AM.
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
can you list some advantages of having yours vs rocky road sliders. Yours look awesome.
CHRISTMAS WISHLIST
Rugged Ridge 13309.02 Roll/Pitch Indicator Clinometer with Light by Rugged Ridge
2006 XK QUADRA TRAC 2, 245/70R17 FIRESTONE DESTINATION M/T, ROUGH COUNTRY 2IN LIFT WITH RUSTYS FRONT LEVELING SPACER. FRONT AND REAR SWAY BAR HARDWARE REMOVED
Yes I can... I offer this in response to your question as I do not want to be known as the business that trashes another company in order to promote ( I hope that I always remain above that).
The Rocky Road slider will run you $400 which is $50 less than what we are asking for ours, the quality of the two is where you will see your getting your monies worth. I personally purchased and installed the Rocky Road on my Commander as my first set of sliders and they are a good product, just not good enough in my opinion.
This is the Rocky Road slider:
As you can see they use a 1" square pipe that bolts to your frame and six bolts to your pinch weld, due to the arms being so long they act as a pivot which allows the slider to ride up and just before I removed mine I noticed that I had less than 1/4 inch clearance between the top of the slider and an open door. If you hit rocks hard enough (and I wheel hard) you will bend the Rocky Road up and run the risk of not being able to open your doors.
As you can see in the following photo (I will replace with a better photo soon), the metal used for our product is 2x4 steel and a 1.5" round tube (round in almost always stronger than square).
When I removed the Rocky Road slider I found body damage in two places which was actually caused BY the slider, the purpose of a slider is supposed to be to protect the body from damage.
Our slider also sticks out further from your vehicle in order to prevent the obstacles from causing damage to the side of your vehicle if you get to close.
I hope that helps and thanks for asking.
Last edited by Knappster; 12-12-2011 at 06:09 PM.
Hammers and welders fix many things.
maybe not ripped off steps...
I'm going to need a big hammer LOL
I did the damage after I took my running boards offIf I would of left them on I would of been fine.
Don't be a fool, wrap yo tool.I did the damage after I took my running boards off
I really like these sliders. Great work!!!
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
There are currently 2 users browsing this thread. (0 members and 2 guests)
Posting Permissions
Reply With Quote
