No problem!Originally Posted by BonesWK
No problem!
DANG!!!! those sliders look good!!!!! Man, i want a set soooo bad. i guess I need to start saving my pennies, lol.
You know, the area of the rocker that you can see between the slider and the door really isn't that bad. I guess I one really wanted too, they could trim the plastic rockers to fit in that gap. But that would probably take a while./
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
All done with the install sliders are on and looking sick.
A shot of the brackets underneath
Huh? How do those mount? Is there no blts to the pinch weld?
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
No there are no bolts to the pinch weld. The pinch weld sits in the channel on the brackets. There are three of these brackets and two brackets one in the rear and one in the front on the outside above the pinch weld total of 5. Not sure if I can explain it right here but the way its designed it does use the pinch weld and rocker and pretty much a lot of the jeep for support to make it solid. I jumped up and down on the tub and I'm 200LBS and that's the weakest part of the sliders they never moved. I also jacked the jeep up from the center of the tube which is a lot of pressure in a small area and they didn't move again.
I can't wait to see thee things slide across a rock at URE this weekend! LOL, don't take that the wrong way Sal, LOL.
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
