I saw a tubular style roll cage on a cherokee and it looked sweet
I saw a tubular style roll cage on a cherokee and it looked sweet
2008 3.7L QT-1 dark blue Jeep Commander // 3+" modified OME lift with 3/8" Rocky Road strut spacer // 4" rear SL springs // 265/70/17 Goodyear Duratracs (Load E) // 1.5" spidertraxx spacers // F-150 Monroe Load Levelers // 4xguard matrix, front guard, belly guard, and rock sliders // 130 watt KC Daylighters - 2 // Airflow snorkel // Thrush welded exhaust // Defender Roof Rack with side ladder // Hypertech Max Energy Programmer
i saw some 1/4 panel side protection on an xj forum. they went from the back of the back door,to the tail light. from the bottom of the back,side window,down to the lower part of the 1/4 panel.they were alluminum diamond plate,powder coated black!I'd also like to see some steal box, tail lights. also avail. for the xj. they get rid of the plastic tail lights. a steal box replaces them and they put round LED lights in them. no more broken plastic tail lights from rubbing or backing into a tree with them! since our xk's look like grown up xj's. anything that looks cool on a xj will look sweet on our xk's!
06 Hemi Limited,black,QD2,elsd,loaded minus back up camera,OEM hitch with 7pin harness. RC 2"lift,BFG Rugged Terrains 265x70x17(31.7"),1 3/4" Rugged ridge wheel spacers(front), 4xguard Matrix Pushbar and Grill Hoop,4xguard rockrail/sliders,4xGuard 12 bolt diff guard,6"Hella 500 Black Magic Driving lights.
I agree! Steel corners would be sweet.
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
Another idea i had would be pretty cool if you wheel tight trails with trees. I have already put the roof of the XK up against a tree and had to get a couple guys to push the top to get me by it. I have seen a tube type slider to go over the rear doors and back end. Let me find pics of this.
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
http://www.jeepforum.com/forum/f11/x...liders-740912/
http://www.hdoffroadengineering.com/...j-roof-sliders
I like the last one best, but I think there would be a market for these on our Jeeps. If you make them I would but them for sure
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
Why don't you guys just build an exoskeleton LMAO
CHRISTMAS WISHLIST
Rugged Ridge 13309.02 Roll/Pitch Indicator Clinometer with Light by Rugged Ridge
2006 XK QUADRA TRAC 2, 245/70R17 FIRESTONE DESTINATION M/T, ROUGH COUNTRY 2IN LIFT WITH RUSTYS FRONT LEVELING SPACER. FRONT AND REAR SWAY BAR HARDWARE REMOVED
You guys are being a little harsh to GetLost4x4 I think.
I have his prototype of a front receiver hitch. I think the bumper and my front receiver mount in the same fashion. I would not take a running yank using it, which is what I think happened with CrunchyWizards. It mounts to the side rails as well as through the cross bar. But it attaches to unibody sheet steel, and you're right, it is only as strong as the sheet steel and welds it attaches to.
It works great as a winch mount and tow connection but you have to use it right. You can break anything by abusing it.
That said, I applaud SteelArmadillo for looking for ways to add strength.
GetLost4x4 did show his stress in negative ways a few times. He was trying to make his company work and didn't get enough buyers to make it a go to support his family. He had 2 userids over time because he had a private one and then later started the business and used his business id. He was banned because of disagreements with the administration, not because he treated other forum members poorly. They wanted more money than he could afford to be a sponsor and I think he tried to continue doing business after he did not renew his sponsorship.
GetLost4x4 had a good reputation with many people on the other forum and was encouraged by many to continue to build things for the XK, when no one else was making the products he was making. If I recall correctly, the only forum member he had a heated argument with was ElCid. And I think he didn't represent himself well in his debate with ElCid.
I personally was sad to see his business not succeed and him leave that forum. But he went back to college to complete his degree.
You're right, you should not bash competitor's products, but I don't think we should bash him personally either. Nor should you take pleasure in his demise.
2007 XK Limited, 5.7L Hemi, QDII, Rusty's 2" lift, Spidertrax 1.5 inch wheel spacers, GetLost4x4's front hitch mount for portable winch.GY Duratracs 265/70R17s, Rola Roof Rack.
There are currently 1 users browsing this thread. (0 members and 1 guests)