CICO7 Garage

[cico7]

For quite a while, I wanted a plug for jumper cables instead of the usual clip here,
clip there, and fight the cables. Here is what i did....

I bought 2 ANDERSON,50A ,CONNECTOR KITS, SB50A, 600V,BLACK, on ebay. I paid less than $8 for the pair.


I soldered the ends of the cables to the battery clamps. I didnt like that
the wire ends were clamped on.




I put the connectors in the vices


Filled with silver solder


I used my map gas torch on these


Side View of Plate


Lifted Plate - you can see where I drilled through to run the cable.
Routed it along side the bumper and attached to an existing harness.


Attached copper lugs to cables


Red and Black wire zip tied to wire

[Sal-XK]

^^^ Thats a pretty cool idea!