I started a thread about this recently. ... I noted the spring codes for my XK but haven't been able to find information on spring rates that would allow us to estimate how much ride height you'd gain.
Just installed OME HD coils and struts on my XK two weeks ago. I have a HEMI with towpackage and have the coils sitting in my garage. Send me a pm if you're interested......
2007 4x4 Limited, 5.7L Hemi
Mods:
OME HD Lift, 1/4" Rusty's strut plates, HD UCA's
American Racing ATX Mojave wheels with Goodyear Duratrac 265/70 R17 tires
Mopar skid plates & sport utility bars, 12" billet antenna
Im considering doing this and ridding myself of my daystar lift... I wonder what OME springs and 1/4" spacers would do?
Edit, im looking for about an inch or just alittle more....
Last edited by Lt_JWS; 11-23-2011 at 08:41 PM.
2006 XK 4.7V8 | Quadra-Drive II |2 1/2" Lift | K&N Filter| Port and Polished Throttle Body| Magnaflow# 12256 | Leather, heated seats, Command View| Factory Tow hooks | Full factory skids | Rear D-Ring Shackle |1.25" front/1" rear spacers | JK Wheels | 245/75R17 Nitto TG
That's what im running: http://www.theultimatejeep.com/showt...OME-HD-Install
if youre looking for an inch or alittle more youre going to douible your goal with the OME springs and 1/4" spacer. now i think if you did:
- rear OEM xk tow package coils
- front HEMI or CRD coils
- bilstein hd shocks/struts
- jba front strut spacer
you would be looking at an inch maybe an inch and 1/4" over the stock height. its tempting to go this route.
2007.5 WK Laredo
- OEM+ -
the bilsteins wont add to the ride height. theyre a good upgrade, but not necessary if he's doing this on a budget.
2006 XK 4.7V8 | Quadra-Drive II |2 1/2" Lift | K&N Filter| Port and Polished Throttle Body| Magnaflow# 12256 | Leather, heated seats, Command View| Factory Tow hooks | Full factory skids | Rear D-Ring Shackle |1.25" front/1" rear spacers | JK Wheels | 245/75R17 Nitto TG
There are currently 1 users browsing this thread. (0 members and 1 guests)