My dad had a Cherokee sport with 4L that started squeeking. He thought it was the pulley. He bought and installed a new pully. It still squealed.
I asked why they didnt replace the water pump....cause it still squeaked. He had the pump replaced, squeek (squeak) gone.
If the squeak doesn't change significantly when the AC compressor clutch engages, then its probably not the compressor. Engaged vs disengaged is a different set of bearings and also rules out the clutch itself. So that would be a good test for peace of mind.
Expect the frequency of the squeak to change though because engaging the AC clutch will cause a fluctuation in engine RPM and load on the belt.
Let us know how it sounds.
I'll repost this - it didn't load correctly.
When the compressor engages - it squeaks louder. When I started the vehicle with a/c max it was loud - I tested it while driving and any time i turn on the A/C it comes on. It's my AC Compressor.
Last edited by AJeepZJ; 11-17-2011 at 03:15 PM.
Sounds like the bearings on the Compressor.
2007 Commander 4.7L, QTII, OEM Towing Option, tow hooks, 2"OME + 1/4" rusty's leveling spacer, Bilstein 5150 Rear Shks, Rear sway bar removed, 4xguard front skid, Offroad Unlimited Defender Roof Rack, Hella 500FF lights, 265/70/R17 BFG KM2 M/Ts 1.5" Rough Country Wheel Spacers
http://www.theultimatejeep.com/showt...acerc-s-Garage
yup... that sucks
May i suggest: Dorman 34178. $30
There are currently 1 users browsing this thread. (0 members and 1 guests)