I want to add that are unibody is stronger then most unibody's I've delt with. I was impressed on how thick it was in some sections.
Yes I would cut that piece, I plan on installing an aftermarket steel bumper someday
Yes I would cut that piece, but I don't plan on changing my bumpers
No I would not cut that piece, but I would like a steel replacement winch bumper
No I would not cut that piece, but I would like a steel replacement non-winch bumper
No I would not cut that piece, but I don't plan on changing my bumpers on this vehicle
I want to add that are unibody is stronger then most unibody's I've delt with. I was impressed on how thick it was in some sections.
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
Sorry about the confusion on the "subframe", that's just what I call it. Sal descibed waht I meant pretty well.
MY vote is yes I'd remove the thin piece, install something thicker and stronger, hopefully add a steel bumper to it, and while I'm at it add steel plates to the frame from the front to the firewall (for stability across many situations)
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
I'd like to remind everyone (because i think a lot of guys may be new since we had this thread a while ago) that by cutting that crossmember like jon is suggesting, we can hopefully end up with a bumper along the lines of this (which is the best winch bumper ive seen for an XK yet):
I like that, minus the winch. I dont really need one, and if I did I would want a reciever for a multi mount. With that design though you could probably have one for a winch that needs the cross peice removed, and one without that does not. Everyone would be happy then, and it would be cheap from a manufacturing standpoint too.
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
Here's another pic if it helps (without the front hitch receiver):
2007 XK Limited, 5.7L Hemi, QDII, Rusty's 2" lift, Spidertrax 1.5 inch wheel spacers, GetLost4x4's front hitch mount for portable winch.GY Duratracs 265/70R17s, Rola Roof Rack.
I'm on my phone so Im not going to look for it but. But segorea or something like that the guy from Korea has a nice thread about removing that section and putting the winch in it's place and there is a WK that did to. So there's some pics out there someone can dropp in here to look at.
There are currently 1 users browsing this thread. (0 members and 1 guests)