Yes. There should be absolutely no play in the joint.
Now is a good time to get the JBAs.... then the next time the joint wears its only a $30 part.
Yes. There should be absolutely no play in the joint.
Now is a good time to get the JBAs.... then the next time the joint wears its only a $30 part.
JBA order placed.. do I need to get an alignment after installing them?
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
Well they shipped them already, should be here Dec 22.. I didn't see any write ups on the install so I'll try to remember to take some pics and such. Looks pretty straight forward though.
Yeah its pretty easy. I recommend taking the fender liner out to make it really easy to get to the bolts. So if you don't have them, you'll just need the rivets for them (I have the part numbers in my pinch weld how-to thread)
There are currently 1 users browsing this thread. (0 members and 1 guests)