Well i broke down and ordered a set of 1.5" wheel spacers for my XK, My question, am I going to have to do anything to the pinch weld considering I have 245/75 tires, if so does anyone have a good guide on what needs to be trimmed front and rear?
Well i broke down and ordered a set of 1.5" wheel spacers for my XK, My question, am I going to have to do anything to the pinch weld considering I have 245/75 tires, if so does anyone have a good guide on what needs to be trimmed front and rear?
2006 XK 4.7V8 | Quadra-Drive II |2 1/2" Lift | K&N Filter| Port and Polished Throttle Body| Magnaflow# 12256 | Leather, heated seats, Command View| Factory Tow hooks | Full factory skids | Rear D-Ring Shackle |1.25" front/1" rear spacers | JK Wheels | 245/75R17 Nitto TG
You wont have to do anything with the rear. As for the front, you might have to bend over the pinch weld and remold the plastic inner fender well. I would install the spacers and see exactly where you have rubbing, if any, and then go from there. Here is a good write up on the pinch weld mod.
http://www.theultimatejeep.com/showt...ght=pinch+weld
Last edited by 07JeepXK; 01-02-2012 at 08:06 PM.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
thanks for the quick reply, hopefully I wont have to do much...
2006 XK 4.7V8 | Quadra-Drive II |2 1/2" Lift | K&N Filter| Port and Polished Throttle Body| Magnaflow# 12256 | Leather, heated seats, Command View| Factory Tow hooks | Full factory skids | Rear D-Ring Shackle |1.25" front/1" rear spacers | JK Wheels | 245/75R17 Nitto TG
How much tread do you have left on your tires and when you turn the steering wheel how close are the front tires to the rear portion of the inner fender? You might get lucky and not have to do anything, it all depends.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Last edited by Lt_JWS; 01-04-2012 at 04:10 PM.
2006 XK 4.7V8 | Quadra-Drive II |2 1/2" Lift | K&N Filter| Port and Polished Throttle Body| Magnaflow# 12256 | Leather, heated seats, Command View| Factory Tow hooks | Full factory skids | Rear D-Ring Shackle |1.25" front/1" rear spacers | JK Wheels | 245/75R17 Nitto TG
There are currently 1 users browsing this thread. (0 members and 1 guests)