Page 1 of 11 123 ... LastLast
Results 1 to 10 of 249

Thread: Criket's garage

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Getting Dirty criket's Avatar
    Join Date
    May 2011
    Location
    Dobson, NC
    Posts
    647
    Rep Power
    14

    Criket's garage

    Well, I suppose it's about time to start my build/garage. I'm combining my Jeep build with my garage build since they are both on-going at the same time.

    The Jeep is a 2005 Grand Cherokee with a V6 and QT1. (I'll come back and update my jeep build soon.)

    The garage is a 24' x 30' stick built wrapped in metal with 2 nine foot automatic garage doors and a basic 36" passage door.

    Originally when I moved here 3 years ago, there was an old building behind my house. It was a 20' x 20' block building and the roof was about to cave in. I stored what I had to in there but I always hated it. I don't have any pictures of it because it was that pathetic. Well, summer of 2011, some stupid idiot broke into that crappy block building an stole a few tools. I was pissed to say the least and said I'll fix it so they won't be able to do that again. So I hired a crew and they built my garage August 2011.

    First the old building came down and a pad was made.



    6" x 6" post in each corner and 2" x 6" studs go horizontal. And the passage door.



    Rafters, sheathing boards (spelling?), and begin wrapping it with some insulation and white metal on the sides.



    Finish white metal sides and charcoal gray roof. Eaves are boxed to keep the critters out. (critters = birds and thiefs)



    Concrete poured. 4 inches all around with 6" at the sides. The cieling is 10' tall so no room for a lift thus only need 4" of concrete.

    SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount

  2. #2
    Lifetime Member Getting Dirty Sal-XK's Avatar
    Join Date
    Jun 2010
    Location
    Raeford NC
    Posts
    5,201
    Rep Power
    20
    Pretty col man about time you posted a garage thread.


    Sent from my iPad using Tapatalk

  3. #3
    Senior Member Getting Dirty criket's Avatar
    Join Date
    May 2011
    Location
    Dobson, NC
    Posts
    647
    Rep Power
    14
    Quote Originally Posted by Sal-XK View Post
    Pretty col man about time you posted a garage thread.


    Sent from my iPad using Tapatalk
    Yea I know. I would have had more last night but my internet quit, ARGH!!! I'll add more today.
    SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount

  4. #4
    Senior Member Getting Dirty criket's Avatar
    Join Date
    May 2011
    Location
    Dobson, NC
    Posts
    647
    Rep Power
    14
    Couple more close up of concrete and the doors.







    And the finshed shell. I have since washed all the red mud off, lol.

    SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount

  5. #5
    Senior Member Getting Dirty criket's Avatar
    Join Date
    May 2011
    Location
    Dobson, NC
    Posts
    647
    Rep Power
    14
    Since then I have filled it up with all my junk and my wife's stuff.

    We were pretty packed on the floor with all the stuff so me and my dad built and overhead storage.



    A couple of weeks ago, I hung receptacle boxes and ran the wire for them. And this past weekend I installed a few receptacles. Pretty straight forward stuff.




    Here are a couple of random inside pics. Excuse the mess, I'm still working on it. The mess drives me NUTS!!!!




    And my wife's car. 2008 Acura TL. Quick little car. I cna't wait to pay it off so we can mod it!!!!

    SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount

  6. #6
    Senior Member Getting Dirty BonesWK's Avatar
    Join Date
    Aug 2011
    Location
    Wilmington, NC
    Posts
    615
    Rep Power
    13
    wow dude nice work on the garage. looks great!
    Ryan ---- 2006 WK 4.7 QDII <- Click for Garage
    2.25" RR Lift - Front Bilstiens - Rear OMEs - 32" Wildpeaks - Saguaro 4x Shackles - Tail Light Guards - AFE intake - Rola - Exhaust
    Twitter Facebook ---- Chive On
    Quote Originally Posted by AJeepZJ View Post
    Can't wait to see that big girl on those fat meats!

  7. #7
    Senior Member Getting Dirty criket's Avatar
    Join Date
    May 2011
    Location
    Dobson, NC
    Posts
    647
    Rep Power
    14
    Quote Originally Posted by BonesWK View Post
    wow dude nice work on the garage. looks great!
    Thanks man! It's slow progress but I love working on it. I grew up doing carpenter work with my dad so I love doing this type of stuff.
    SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount

  8. #8
    Lifetime Member Getting Dirty Sal-XK's Avatar
    Join Date
    Jun 2010
    Location
    Raeford NC
    Posts
    5,201
    Rep Power
    20
    For sure let us k know how that cover fits.


    Sent from my iPhone using Tapatalk

  9. #9
    Administrator
    Join Date
    Sep 2019
    Posts
    1
    Blog Entries
    36
    Rep Power
    10
    Looking good!
    2006 XK Limited, 5.7L Hemi
    Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.

    Knappster's Garage


    Profile for Knappsters

    AKA: the Owner of The Steel Armadillo L.L.C.

  10. #10
    Senior Member Getting Dirty criket's Avatar
    Join Date
    May 2011
    Location
    Dobson, NC
    Posts
    647
    Rep Power
    14
    The UPS man brought me this today:



    It weighs 10 lbs!!!!


    It came with sealant and the bolts and fill plug.





    And my wife brought me this:



    Girl Scout cookies!!!!!!!!!!
    SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount

Page 1 of 11 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •