1. Remove the A-pillar trim panels, (Refer to 23 - BODY/INTERIOR/A-PILLAR TRIM - REMOVAL).

2. Disconnect the headliner wire harness connector at the right A-pillar and washer hose located at the left A-pillar.
3. Remove the sun visor supports, (Refer to 23 - BODY/INTERIOR/SUN VISOR SUPPORT - REMOVAL)
4. Remove the sun visors, (Refer to 23 - BODY/INTERIOR/SUN VISOR - REMOVAL).
5. Remove the overhead console, (Refer to 8 - ELECTRICAL/OVERHEAD CONSOLE - REMOVAL).

6. Using a trim stick C-4755 or equivalent, separate the visor storage bin (3) from the headliner.
7. Disconnect the electrical connectors (1 and 2).

8. Remove the overhead video monitor. (Refer to 8 - ELECTRICAL/AUDIO/MONITOR-MEDIA SYSTEM - REMOVAL)
9. Remove the left upper b-pillar trim panels (Refer to 23 - BODY/INTERIOR/B-PILLAR UPPER TRIM - REMOVAL).

10. Separate the C-pillar trim and position aside, (Refer to 23 - BODY/INTERIOR/PANEL-C-PILLAR TRIM - REMOVAL).

11. Position the front seats fully forward and fully reclined.
12. Fold the rear passenger seats down.
13. Remove the rear upper header trim panel (2), (Refer to 23 - BODY/INTERIOR/MOLDING-REAR HEADER - REMOVAL)
14. Remove the rear push pins (3).
15. Separate the D-pillar trim panels and position aside, (Refer to 23 - BODY/INTERIOR/PANEL-D-PILLAR TRIM - REMOVAL).
16. Lower the rear of the headliner downward from the roof panel and disconnect the rear washer hose.
17. Disconnect the headliner wire harness connector located at the left D-pillar.
18. Remove the sunroof trim ring, (Refer to 23 - BODY/SUNROOF/TRIM RING - REMOVAL)
19. Remove the screws and remove the grab handles (3).
20. Partially separate the door seals from the door opening.
21. Separate the fasteners (1) (hook and loop fasteners or clips) and lower the headliner.
CAUTION: Be careful not to crease the headliner.


22. Lower the front of the headliner downward and remove the headliner through the liftgate door opening.