Gave the beast a wax job, only took me three hours!
Gave the beast a wax job, only took me three hours!
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
lol thanks for the sneak peak!!
Washed mine today as well.... no wax though
They clean up perty! Walking back to my XK today I stared at like a blonde with big.... Well you get the idea LOL
Finished replacing lower ball joints, upper ball joints and bushings I started last Sunday. Now maybe I can get it aligned!
I also replaced the passenger CV (again) because the current one was very stiff and probably contributing to my poor gas mileage.
'06 XK Limited, 5.7 Hemi, QDII, OME struts & HD springs, JBA UCAs, 285/70R17 BFG KM2, 4XGuard Sliders, 4XGuard Diff Guard, Fox 2.0 reservoir shocks, custom bumpers and Warn xi9000
Wish list: SFA, in-dash Windows 8 PC
I forgot to actually LOOK at the back of the Jeep when I ordered the LED's. There's FOUR lights back there! (duh) Back to eBay for another pair of 42 SMD LED "bulbs" and I threw in a couple of courtesy light replacements this time as well. Might as well blast white light onto the floorboards.
The 68 LED backup "bulbs" make the original bulbs look like birthday candles. They look really cool behind the lens too. (when unlit)
The pair I played with last night look great in those bullet lens, and the 'star' shape on the end of LED's can be directly seen and look very cool. I put the original bulbs back for now 'til the second pair shows up. They are better in every way compared to the bulb filaments. Walking from side to side, the LED's show up much better than the bulbs. (I had a bulb in the lower, and an LED in the upper for testing)
Also, it needs load resistors because the Jeep can't deal with no bulb filament load, so I have four 6 ohm 50 watt resistors on the way too. Remove one upper bulb, and the brake lights and third light on top all light up. Turn signals, and the LED won't light up, while the front bulb is rapidly bink-bink-binking away. (The running lights seem to work okay)
The upper pair is brake lights, the lower pair are turn signals. Of course, all four light up for running lights.
These are similar to what I have:
2006, 4.7L, QTII, Toyo Wild Country M/T 265/70R17 tires, Ultrasport 175 wheels, Rocky Road 2.25'' lift kit, HID off-road lighting, Surco 50x60 roof rack, Foxwing awning, Superchips performance programming.
Last edited by pjmjr508; 09-16-2012 at 10:45 PM.
PJMJR508
(Happy Jeep)
There are currently 1 users browsing this thread. (0 members and 1 guests)